Injection Molding Machines – UPMOLD https://upmold.com Injection molding & mold making custom manufacture | Upmold Mon, 08 Feb 2021 06:13:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://upmold.com/wp-content/uploads/cropped-UP-logo-1-32x32.png Injection Molding Machines – UPMOLD https://upmold.com 32 32 Die Casting Machine Specifications Table https://upmold.com/die-casting-machine-specifications-table/ Sat, 23 Dec 2017 04:11:30 +0000 http://upmold.com/?p=8923 Common Die Casting Machine Specifications and Parameters List The casting ( Cold chamber & hot chamber die casting machine) machine parameter list from LK-casting machine datasheet which just for reference of die casting mold design and machine size selection, please concern your actual die-casting machine parameter before your mass products or die [...]

The post Die Casting Machine Specifications Table appeared first on UPMOLD.

]]>

Common Die Casting Machine Specifications and Parameters List

The casting ( Cold chamber & hot chamber die casting machine) machine parameter list from LK-casting machine datasheet which just for reference of die casting mold design and machine size selection, please concern your actual die-casting machine parameter before your mass products or die trail.

die casting machine mounting chart
Item
项目		 Unit单位 DCC130 DCC160 DCC200 DCC280 DCC400
Clamping Force
锁模力		 KN 1450 1600 2000 2800 4000
Clamping Stroke
锁模行程		 mm 350 380 400 460 550
Min-Max Die Height
模具厚度		 mm 250-500 200-550 200-600 250-650 300-700
Platen Size
模板尺寸		 mm 650X650 680X680 740X740 860X860 970X970
Bars Space Size
容模尺寸		 mm 425X425 460X460 510X510 560X560 620X620
Intensifier Injection Force
压射力		 KN 220 270 270 315 410
Injection Stroke
射料行程		 mm 320 340 370 400 500
Plunger Diameter
冲头直径		 mm 40 50 60 40 50 60 50 60 70 40 50 60 60 70 80
Shot Weight
容量（铝）		 Kg 0.7 1.15 1.6 0.8 1.3 1.8 1.35 1.95 2.65 1.5 2.1 2.9 2.7 3.6 4.7
Casting Pressure
铸造压力		 Mpa 175 112 77 214 137 95 137 95 70 162 113 82.6 145 106 81
Casting Area
铸造面积		 cm2 82 129 186 74 116 167 145 209 285 170 245 335 275 375 490
Max Casting Area
under 40 Mpa		 cm2 362 400 500 700 1000
Shot Injection Position
压射位置		 mm -100 -140 -140 -125 -175
Plunger Penetration
冲头行程		 mm 115 135 140 140 200
Diamter of Pressure Chamber Flange mm 110 101.6 101.6 101.6 101.6
Location Ring Height
法兰高度		 mm 10 12 12 12 12
Ejector Force
顶出力		 KN 108 108 108 150 180
Ejector Stroke
顶出行程		 mm 85 85 100 105 125
Item
项目		 Unit
单位		 DCC500 DCC630 DCC700 DCC800
Clamping Force
锁模力		 KN 5000 6300 7000 8000
Clamping Stroke
锁模行程		 mm 580 650 720 760
Min-Max Die Height
模具厚度		 mm 350-850 350-850 350-900 400-950
Platen Size
模板尺寸		 mm 1162X1162 1200X1200 1300X1300 1400X1395
Bars Space Size
容模尺寸		 mm 760X760 750X750 800X800 910X910
Intensifier Injection Force
压射力		 KN 460 590 590 665
Injection Stroke
射料行程		 mm 580 600 700 760
Plunger Diameter
冲头直径		 mm 70 80 90 70 80 90 80 90 100 80 90 100
Shot Weight
容量（铝）		 Kg 4.3 5.6 7.1 4.3 5.6 7.2 6.5 8.3 10 7.2 9.1 11.2
Casting Pressure
铸造压力		 Mpa 122 93 73.5 153 117 92 117 92 75 133 105 85
Casting Area
铸造面积		 cm2 405 535 680 410 536 679 596 754 931 600 760 940
Max Casting Area
under 40 Mpa		 cm2 1250 1575 1750 2000
Shot Injection Position
压射位置		 mm -175 -250 -250 -250
Plunger Penetration
冲头行程		 mm 250 250 250 295
Diamter of Pressure
Chamber Flange		 mm 165 165 165 200
Location Ring Height
法兰高度		 mm 15 15 15 20
Ejector Force
顶出力		 KN 240 315 315 315
Ejector Stroke
顶出行程		 mm 120 160 160 180
Item
项目		 Unit
单位		 DCC900 DCC1000 DCC1250 DCC1600 DCC2000
Clamping Force
锁模力		 KN 9000 10000 12500 16000 20000
Clamping Stroke
锁模行程		 mm 800 880 1000 1200 1400
Min-Max Die Height
模具厚度		 mm 400-1000 450-1150 450-1180 500-1400 650X1600
Platen Size
模板尺寸		 mm 1460X1460 1620X1620 1730X1740 2010X1960 2150X2150
Bars Space Size
容模尺寸		 mm 930X930 1030X1030 1100X1100 1180X1180 1350X1350
Intensifier Injection Force
压射力		 KN 760 865 1075 1285 1500
Injection Stroke
射料行程		 mm 775 880 880 930 960
Plunger Diameter
冲头直径		 mm 80 90 100 110 90 100 110 120 100-140 110-150 130-170
Shot Weight
容量（铝）		 Kg 7.1 9 11.2 13.5 9.5 11.7 14.2 16.9 13-25.4 17-32 24-41
Casting Pressure
铸造压力		 Mpa 154 121 98 81 136 110 91 76.5 137-70 137-73 113-66
Casting Area
铸造面积		 cm2 583 738 912 1103 730 905 1095 1305 910-1785 1165-2190 1769-3030
Max Casting Area
under 40 Mpa		 cm2 2250 2500 3125 4000 5000
Shot Injection Position
压射位置		 mm -250 0,-300 -160 -320 -175 -350 -175 -350
Plunger Penetration
冲头行程		 mm 300 300 320 360 400
Diamter of Pressure
Chamber Flange		 mm 200 240 240 260 260
Location Ring Height
法兰高度		 mm 20 20 25 25 30
Ejector Force
顶出力		 KN 360 500 570 570 650
Ejector Stroke
顶出行程		 mm 190 200 200 250 300
Download PDF
aluminium casting2018-07-11T04:03:22+00:00
casting making parts
aluminium casting
Casting Manufacturing Parts2018-03-17T09:27:56+00:00
casting process parts
Casting Manufacturing Parts
Custom Casting Parts2018-03-17T09:27:56+00:00
Custom Casting Parts
Aluminium Casting Products2018-07-11T04:10:13+00:00
Aluminium Casting Products
Aluminium Die Casting Custom2018-03-17T09:27:57+00:00
aluminium die casting component
Aluminium Die Casting Custom
Aluminium Casting Component2018-07-11T06:07:55+00:00
aluminium casting component
Aluminium Casting Component
Aluminium Casting Part2018-07-11T06:06:27+00:00
aluminium casting part
Aluminium Casting Part
Aluminium Die Casting Products2018-03-17T09:27:57+00:00
aluminium-die-casting-products
Aluminium Die Casting Products
Casting Aluminium Part2018-03-17T09:27:57+00:00
casting-aluminium-part
Casting Aluminium Part
Die Cast Aluminium2018-03-17T09:27:58+00:00
casting-products
Die Cast Aluminium
Die Casting Aluminium Product2018-03-17T09:27:58+00:00
die-casting-aluminium-body
Die Casting Aluminium Product
Custom Aluminium Casting Part2018-03-17T09:27:58+00:00
custom-aluminium-casting
Custom Aluminium Casting Part
Die casting Magnesium Alloy Products2018-03-17T09:27:58+00:00
Die casting zinc alloy products
Die casting Magnesium Alloy Products
Die casting process component2018-03-17T09:28:02+00:00
die-casting-process-component
Die casting process component
Die Casting Tools Processed Part2018-03-17T09:28:03+00:00
die-casting-tools-processed-part
Die Casting Tools Processed Part
Magnesium Die casting products2018-03-17T09:28:03+00:00
magnesium-casting-products
Magnesium Die casting products
Magnesium casting unmanned plane body part2018-03-17T09:28:03+00:00
magnesium-casting-unmanned-plane-body
Magnesium casting unmanned plane body part
Die Casting Aluminium Parts2018-03-17T09:28:03+00:00
die-casting-parts
Die Casting Aluminium Parts
Die Casting  Tools Processed Aluminium Products2018-03-17T09:28:04+00:00
die-casting-processed-parts
Die Casting  Tools Processed Aluminium Products
Aluminium Casting Manufacturing Product2018-03-17T09:28:04+00:00
aluminium-casting-manufacturing-product
Aluminium Casting Manufacturing Product
die casting molded parts2018-03-17T09:28:04+00:00
die-casting-molded-parts
die casting molded parts
die casting mould casting products2018-03-17T09:28:04+00:00
die-casting-mould-casting-products
die casting mould casting products
Aluminium Die Casting2018-03-17T09:28:23+00:00
Pumper Elbow Connecter
Aluminium Die Casting
Die Casting Pumper Connection Part2018-03-17T09:28:23+00:00
Pumper Connection Part
Die Casting Pumper Connection Part
Electrical Housing Box2018-03-17T09:28:24+00:00
Electrical Housing Box
Electrical Housing Box

The post Die Casting Machine Specifications Table appeared first on UPMOLD.

]]> Haitian injection moulding machine specification List https://upmold.com/haitian-injection-moulding-machine-specifications/ Fri, 18 Aug 2017 08:50:19 +0000 http://upmold.com/?p=8702 Haitian Injection Molding Machine Specifications List What injection machine was chosen for injection molding manufacturing? Plastic injection moulding machine specifications Injection moulding machine specifications Machine Size 机台大小 INJECTION UNIT 注射装置 CLAMPING UNIT 合模装置 Screw Type Screw Diameter Screw L/D Ratio Shot Size (Theoretical) Injection Weight (PS/g) Injection Speed Plasticizing [...]

The post Haitian injection moulding machine specification List appeared first on UPMOLD.

]]>
Injection molding machine

Haitian Injection Molding Machine Specifications List

What injection machine was chosen for injection molding manufacturing?

  • Plastic injection moulding machine specifications
  • Injection moulding machine specifications

Machine Size

机台大小

INJECTION UNIT 注射装置

CLAMPING UNIT 合模装置

Screw Type

Screw Diameter

Screw L/D Ratio

Shot Size (Theoretical)

Injection Weight (PS/g)

Injection Speed

Plasticizing Capacity

Injection Pressure

Clamp Tonnage

Toggle Stroke

Space Between Tie Bars

Max. Mold Height

Min. Mold Height

Ejector Stroke

Ejector Tonnage

Ejector Number

螺杆类型

螺杆直径

长径比

理论容量

注射重量

射出速度

塑化能力

注射压力

合模力

开模行程

拉杆内距

最大模厚

最小模厚

顶出行程

顶出力

顶杆数量

mm

L/D

cm3

g

mm/s

g/s

Mpa

KN

mm

mm

mm

mm

mm

KN

Piece

HTF58X

A

26

24

66

60

144.5

7

245

580

270

310×310

320

120

70

22

1

B

30

21

88

80

9.3

184

C

34

19

113

103

11.9

143

HTF86X

A

34

21.2

131

119

104

10.6

206

860

310

360×360

360

150

100

33

5

B

36

20

147

134

11.9

183

C

40

18

181

165

14.7

149

HTF120X

A

36

23.3

173

157

121

12

197

1200

350

410×410

430

150

120

33

5

B

40

20

214

195

15.4

160

C

45

18.7

270

246

18.8

126

HTF160X

A

40

225.5

253

230

123.7

15.8

202

1600

420

455×455

500

180

140

33

5

B

45

20

320

291

20

159

C

48

18.8

364

331

24.7

140

HTF200X

A

45

22.2

334

304

125.5

19.4

210

2000

470

510×510

510

200

130

52

9

B

50

20

412

375

24

170

C

55

18.2

499

454

29

141

HTF250X

A

50

22

442

402

124

23.8

205

2500

540

570×570

570

220

130

52

9

B

55

20

535

487

28.8

169

C

60

18.3

636

579

34.3

142

HTF300X

A

60

21.7

727

662

238

31.1

213

3000

600

600×600

660

250

160

62

13

B

65

20

853

776

279

36.5

182

C

70

18.6

989

900

324

42.3

157

HTF360X

A

65

21.5

1068

972

332.1

41.2

208

3600

660

710×710

710

250

160

110

13

B

70

20

1239

1127

368

44.9

180

C

75

18.7

1423

1295

394.7

49

156

HTF450X

A

70

22.9

1424

1296

352

44.9

204

4500

740

780×780

780

330

200

110

13

B

80

20

1860

1693

460

58.7

156

C

84

19

2050

1866

507

64.7

141

HTF530X

A

75

23.4

1749

1592

394

52

205

5300

820

820×820

820

350

200

158

17

B

84

21

2195

1997

494

65.3

163

C

90

19.6

2519

2292

567

74.9

142

D

100

17.6

3110

2830

665

87.9

115

HTF650X

A

80

24.8

2036

1853

428

56.7

224

6500

900

895×895

900

400

260

175

17

B

90

22

2576

2344

541

71.8

177

C

100

19.8

3181

2895

668

88.6

143

D

110

18

3849

3503

768

101.8

118

HTF780X

A

90

24.4

2799

2547

542

69

228

7800

980

980×980

980

400

260

186

21

B

100

22

3456

3145

669

85.2

184

C

110

20

4181

3805

809

103.1

152

D

120

18.3

4976

4528

915

116.6

128

HTF1000X

A

100

24.2

3770

3431

660

88.3

211

10000

1100

1090×1090

1100

500

320

215

21

B

110

22

4562

4151

799

100.8

174

C

120

20.2

5429

4940

951

120

146

D

130

18.6

6371

5798

1060

133.8

125

HTF1250X

A

110

26.2

5227

4757

793

103

205

12500

1250

1250×1250

1250

550

320

215

21

B

120

24

6220

5660

944

122.6

172

C

130

22.2

7300

6643

1108

143.9

147

D

140

20.6

8467

7705

1221

158.6

126

HTF1400X

A

120

24

6220

5660

944

122.6

172

14000

1450

1450×1450

1400

700

350

318

35

B

130

22.2

7300

6643

1108

143.9

147

C

140

20.6

8467

7705

1221

158.6

126

HTF1600X

A

130

24

7818

7114

1048

147.6

164

16000

1520

1500×1350

1400

700

350

318

29

B

140

22.3

9067

8251

1216

171.2

142

C

150

20.8

10408

9471

1325

186.7

123

HTF1800X

A

130

24

7818

7114

1048

147.6

164

18000

1560

1600×1450

1600

750

400

430

33

B

140

22.3

9067

8251

1216

171.2

142

C

150

20.8

10408

9471

1325

186.7

123

HTF2000X

A

140

24

9863

8812

1148

167.4

163

20000

1560

1650×1500

1560

780

400

430

33

B

150

22.4

11115

10115

1252

183

142

C

160

21

12647

11509

1349

196.7

125

HTF2400X

A

150

22.4

11115

10115

1252

183

142

24000

1700

1800×1700

1800

800

450

430

33

B

185

19.7

26020

23678

1507

201

136

HTF2800X

A

170

23.5

19293

17557

1779

188

161

28000

2000

1900X1750

1900

1000

450

430

33

B

200

20

35154

31990

2095

230

137

C

215

21

43203

39310

2095

247

135

HTF3600X

A

240

22

56549

51460

2450

292

158

36000

2250

2200X2200

2100

1100

550

550

25

Machine Size

机台大小

mm

L/D

cm3

g

mm/s

g/s

Mpa

KN

mm

mm

mm

mm

mm

KN

Piece

Screw Type

Screw Diameter

Screw L/D Ratio

Shot Size (Theoretical)

Injection Weight (PS/g)

Injection Speed

Plasticizing Capacity

Injection Pressure

Clamp Tonnage

Toggle Stroke

Space Between Tie Bars

Max. Mold Height

Min. Mold Height

Ejector Stroke

Ejector Tonnage

Ejector Number

螺杆类型

螺杆直径

长径比

理论容量

注射重量

射出速度

塑化能力

注射压力

合模力

开模行程

拉杆内距

最大模厚

最小模厚

顶出行程

顶出力

顶杆数量

INJECTION UNIT 注射装置

CLAMPING UNIT 合模装置
Download PDF
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post Haitian injection moulding machine specification List appeared first on UPMOLD.

]]>