Overmolding & insert molding manufacturer Upmold is injection molding experts and serve many different industries including medical device, aerospace/defense, consumer products, electronics, and automotion. Their expertise is in medical injection molding but provides a wide range of products to many different sectors and ship parts all around the world.

One service that is often overlooked is their specialization in overmolding. Overmolding is often confused with insert molding since it is performed on the same injection molding machines. Overmolding vs insert molding is actually more simple than what most companies make them out to be. Overmolding is a subset of insert molding. All overmolding is insert molding, but it does not go both ways.

There are many different preferences to what shops call overmolding and insert molding. Insert molding is often when a pre-produced part is inserted into a mold and receives a mold around it.

Overmolding is a similar process but it is typically when a part needs a second operation over the initial insert molding. It is still an insert molded product, but referred to as overmolding. Overmolding vs. insert molding is also commonly referred to as “injection molding with a second operation”, or “insert molding with an over-molded sequence.”

The advantage to using a vertical injection molding machine for either insert molding or overmolding are the following:

• Don’t have to fight gravity to keep the part in.
• Quicker yields (especially when used with bookmolds and rotary tables).
• More flexibility for mold designs

Aberdeen Technologies, Inc is a one-stop shop for all of your injection molding needs. We provide mold designs, mold tooling and manufacturing, injection molding, and turnkey systems. Contact us today to receive a risk-free quote.

• Mold-Tech texture specifications
• Mold-Tech texture depth 
• Mold-Tech texture draft angle spec
• Mold-Tech texture deep Inch-meter conversion chart

• Yick Sang YS-20001 series mold texture technical data sheet
• Yick Sang YS-20001 series texture surface roughness
• Yick Sang YS-20001 series texture draft angle chart
• Yick Sang YS-20001 series texture specifications
• Yick Sang YS-20001 series texture standards
• Yick Sang YS-20001 series mold texture polishing finish
• Yick Sang YS-20001 series texture guidelines
• Yick sang standards for texturization

Plastic Injection Design Guidance that is guiding the injection mold designer and injection molding mold manufacturer to do the design and manufacturing; You will know Some key points of the plastic injection mold design or manufacturing.

• How to do the plastic injection molded part design and injection mold design?
• What guidance will be followed during the plastic injecting part and mold design?
• Why do part design and mold design must follow these guidelines?

Upmold is a turkey plastic injection mold custom manufacturer, we offer part design, engineering support, material selection and testing services; our professional design service including the plastic injection part design assistant, complete part and mold design, Mold flow analyzing and reverse design.

• Parting Line
• Draft
• Undercuts
• Wall Thickness & Uniformity
• Bosses
• Gussets and Ribs
• Radii and Corners
• Material Shrinkage
• Gating
• Ventings
• Knit/Weld Lines

Die casting mold design is a technique for mass-producing metal products and components. Mold design is one of the most important steps in the process because the shape and attributes of the mold will directly affect the final product. The die casting procedure forces molten metal into molds using high pressure and it requires a mold with exact specifications to achieve the task.

There is something very important for the die casting mold design, these key points will influence the die casting die manufacturing successfully or not,  during the die casting injection mold design phase, please consider 8 key points as below.

• Die draft angle
• Fillets on mold & part
• Casting die Parting lines
• Casting Part Bosses
• Part Ribs
• Holes and windows on Part
• Symbols
• Wall thickness of Part

Draft

The draft is the degree to which a mold core can be tapered. A precise draft is needed to smoothly eject the casting from the die, but since the draft is not constant and varies according to the angle of the wall, features such as the type of molten alloy used, shape of the wall, and depth of the mold can affect the process. Mold geometry can also influence draft. In general, untapped holes require tapering, due to the risk of shrinkage. Likewise, inner walls can also shrink, and therefore require more drafting than outer walls. you can search draft angle for more information on the die casting mold design and manufacturing.

Fillets

A fillet is a concave junction used to smooth an angled surface. Sharp corners can hinder the casting process, so many molds have fillets to create rounded edges and reduce the risk of production errors. With the exception of the parting line, fillets can be added nearly anywhere on a mold.

Parting Line

The parting line, or parting surface, connect different sections of the mold together. If the parting line is imprecisely positioned or becomes deformed from work strain, material may seep through the gap between the mold pieces, leading to non-uniform molding and excessive seaming.

Bosses

Bosses are die cast knobs that serve as mounting points or stand-offs in mold design. Manufacturers often add a hole to the interior structure of the boss to ensure uniform wall thickness in a molded product.  Metal tends to have difficulty filling deep bosses, so filleting and ribbing may be necessary to alleviate this problem.

Ribs

Die-cast ribs can be used to improve material strength in products lacking the wall thickness required for certain applications. Selective rib placement can reduce the chance of stress cracking and non-uniform thickness. It is also beneficial for decreasing product weight and improving fill capabilities.

Holes and Windows

Including holes or windows in a die-cast mold directly affects the ease of ejecting a completed molding and enables the creation of substantial drafts. Additional features, such as overflows, flashovers, and cross feeders may be necessary to prevent unwanted casting within the holes or poor material flow around the holes.

Cooling system

The die casting mold cooling system is different to the plastic injection mold that must be without “o” design because of the mold temperature will be more than 2 hundred degrees and the mold must increase to hot before the casting production. the conformal cooling system is best for the casting part quality and cycle time.

Symbols

Manufacturers often include brand names or product logos in the mold design of die-cast products. While symbols do not typically complicate the die casting process, their use can affect production costs. In particular, a raised logo or symbol requires additional molten metal volume for each manufactured part. Conversely, a recessed symbol requires less raw material and can reduce expenses.

However, How to design a quality die casting mold that is a professional and comprehensive working, it bases on the designer’s design skill, die casting manufacturing and casting experience.

UPMOLD is a Custom manufacturer of molds with +/-0.0002 in. tolerance. ABS, acetal, acrylic, Delrin®, nylon, phenolic, polycarbonate, polypropylene, polyethylene, polystyrene, polyurethane and Ultem® materials worked. Capabilities include blow molding, die molding, hot pressing, injection molding, overmolding, tooling, assembly, welding, machining, milling and turning. Aerospace, optical, agricultural, automotive, electronics, marine, medical, military, pharmaceutical and other industries served. Meets AS 9100, ASTM and SAE standards. ITAR registered.

The draft angle is the amount of taper for molded or cast parts perpendicular to the parting line. It can be measured in degrees or mm/mm (in/in).

• Reduces the chance of damage to the part due to friction during release
• Reduces wear and tear and chances of damage to the mold
• Ensures a uniform, smooth, unscratched finish when required
• Ensures the integrity and uniformity of other surface finishes and textures
• Reduces overall cooling time by lessening or eliminating the need for unconventional ejection setups
• Most, if not all, of these benefits offer either direct or indirect overall production cost reductions

• Draft angles are generally a requirement of injection molding design (though there are a select few soft materials, like nylon, that can get away with draft angles of zero).
• Draft should be a part of design for manufacture, and all stakeholders and contributors should be aware of its need at the outset of the design process. This includes product designers, design engineers, and of course, the customer. This allows considerations for design requirements to be taken into account.
• Any draft is always better than no draft.

1) A draft angle of 1½ to 2 degrees is required for most parts

This rule of thumb applies to parts with mold depths of up to 2 inches. At this size, draft as low as 1½ degrees will allow for an easy, non-damaging release from the mold when the expected shrinkage of the thermoplastic material occurs.

2) Draft should average about an additional degree for each inch of depth

For deeper or larger parts, more draft is required to account for the additional surface area (and potential for friction upon mold release).

3) Draft should occur toward the “top” of the mold

In other words, the draft angle should follow the direction of the mold moving up or away as it separates. If you imagine a hollow box with drafted walls, the open top would be slightly wider than the bottom when draft is applied correctly.

4) Textured parts require more draft — sometimes much more

For parts where intricate textures or other raised or recessed surface features are designed,

draft should be added to the initial optimal 1½ to 2 degrees at the rate of another 1½ degrees per thousandth-inch (0.001”) of surface depth.

5) All components of a piece should be drafted

For complex geometries or parts with several tension-easing features like ribs, gussets or louvers (all integral components of good part design), ideally, all of these features — essentially, any area of contact with the mold — should incorporate a draft angle.

6) For metal-on-metal molding functions, more draft is required

This does not refer to injection molding metal, but rather to mold designs where one metal mold component makes direct contact with another.

Typically, 3 degrees of draft will be required to ensure that the mold can separate properly.

7) Draft may have to be incorporated on two sides of a part.

If the parting line for a molded part is in the middle (as with, for instance, a solid cylindrical part), draft should be incorporated on both ends of the part. This is because there are essentially not one but two mold release actions, both of which require draft.

8) At a bare minimum, half a degree of draft should be incorporated into vertical surfaces

This standard should not be adhered to in typical cases, but is more of a guideline when design requirements dictate a nearly uniform angle from top to bottom of a part wall or vertical surface. Half a degree of draft can provide a reasonable compromise between designs requiring straight walls, and the requirements of the injection molding process. In general,

however, performance and part throughput will not be as favorable as going with 1½ to 2 degrees of draft.

9) Again: Any draft is better than no draft

This point is important to remember (and repeat), especially if designers are highly resistant to incorporating draft. If a product design discussion does reach this extreme point, it is still beneficial for the engineer to advocate for some degree of draft, no matter how small. It is unlikely in most design cases that a perfectly straight, zero-degree draft angle is required.

10) Draft is a requirement — not a suggestion — for successful part production

Another point that benefits from mentioning twice: Draft is not a “nice-to-have” feature of design to manufacturing. It’s an important component of a well-designed part and an efficient, high-quality production process. A lack of draft angles can (and likely will) lead to an unacceptable number of rejected parts, and can damage expensive molds. Longer cooling times and complex part ejection requirements can slow production down to an unmanageable and unprofitable speed. In short, just about any other solution is preferable to forgoing draft angles in your injection molded parts.

It’s also important to remember that draft angles are just one component of an effectively designed injection molded piece. Design for manufacture is one of the easiest ways to improve the quality and efficiency of your injection molding process, and it never hurts to stay up to speed on all injection molding best practices. As injection molding specialists here at RevPart, we’re happy to share our expertise with you as we incorporate those best practices into our service.

Wall thickness, material selection, ejection, shrink rates, finish/texture, wall depth, and manufacturing capabilities will influence the draft angle selection, When designing a part or before mold design, apply as much draft angle as possible at wall side—a general rule of thumb is 1 degree of draft per 1 inch of cavity depth, but that can change with the aforementioned factors. Try following these general guidelines:

• 0.5 degrees on all vertical faces is strongly advised.
• 1 to 2 degrees works very well in most situations.
• 3 degrees is minimum for a shutoff (metal sliding on metal).
• 1~3 degrees is required for light texture.
• 3~5 or more degrees is required for heavy texture.

Please check Texture Mini Drafting Chart for Mold Tech Texture Minimum Drafting Angle For Releasing

The casting ( Cold chamber & hot chamber die casting machine) machine parameter list from LK-casting machine datasheet which just for reference of die casting mold design and machine size selection, please concern your actual die-casting machine parameter before your mass products or die trail.