Surface Finish Conversion – UPMOLD https://upmold.com Injection molding & mold making custom manufacture | Upmold Mon, 08 Feb 2021 05:37:24 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://upmold.com/wp-content/uploads/cropped-UP-logo-1-32x32.png Surface Finish Conversion – UPMOLD https://upmold.com 32 32 Yick Sang to VDI | Yick Sang Vs Mold-Tech https://upmold.com/yick-sang-to-vdi-vs-mold-tech/ Sat, 13 Oct 2018 16:48:44 +0000 http://upmold.com/?p=9306 Yick Sang(YS) to VDI | Yick sang Vs Mold-Tech Texture Yick Sang(YS) to VDI Vs Mold-Tech Yick Sang texture to VDI surface finish Grain Charmille VS Mold-Tech texture Agiecharmilles EDM Surface Finish Conversion to Yick Sang mold texture EDM sparking finish to Mold Tech texturing EDM surface VS Mold-tech Yick Sang [...]

The post Yick Sang to VDI | Yick Sang Vs Mold-Tech appeared first on UPMOLD.

]]>
mold tech texture

Yick Sang(YS) to VDI | Yick sang Vs Mold-Tech Texture

Yick Sang Texture Grain Charmille Mold-Tech Texture
VDI 18 K 9000G
YS 1282 VDI 21 K 9070G
YS 1283 VDI 24 K 7000G
YS 1284 VDI 27 K 7050G
YS 1285 VDI 30 K 5000G
YS 1286 VDI 33 K 2400G
YS 1287 VDI 36 MT 2260 (0.04mm)
VDI 39 MT 1055 (0.045mm)
VDI 42 MT 1013 (0.08mm)

Why draft angle injection molding

  • Reduces the chance of damage to the part due to friction during release
  • Reduces wear and tear and chances of damage to the mold
  • Ensures a uniform, smooth, unscratched finish when required
  • Ensures the integrity and uniformity of other surface finishes and textures
  • Reduces overall cooling time by lessening or eliminating the need for unconventional ejection setups
  • Most, if not all, of these benefits offer either direct or indirect overall production cost reductions
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post Yick Sang to VDI | Yick Sang Vs Mold-Tech appeared first on UPMOLD.

]]> VDI 3400 Surface VS Yick Sang Texture Comparison Chart https://upmold.com/vdi-3400-surface-vs-yick-sang-texture-comparison-chart/ Wed, 26 Sep 2018 09:46:18 +0000 http://upmold.com/?p=9162 VDI 3400 Surface VS Yick Sang Texture Comparison Chart VDI Raum Yick Sang Texture Ra Minimum Draft Angle Recommended Draft  Angle 0 0.10 YS20037 0.56 0.2 0-0.2 3 0.15 YS20037 0.56 0.2 0.1-0.2 6 0.20 YS20037 0.56 0.2 0.1-0.2 9 0.30 YS20037 0.56 0.2 0.1-0.2 12 0.40 YS20037 0.56 0.2 0.15-0.2 [...]

The post VDI 3400 Surface VS Yick Sang Texture Comparison Chart appeared first on UPMOLD.

]]>
surface-finish-comparison

VDI 3400 Surface VS Yick Sang Texture Comparison Chart

VDI Raum Yick Sang Texture Ra Minimum Draft Angle Recommended Draft  Angle
0 0.10 YS20037 0.56 0.2 0-0.2
3 0.15 YS20037 0.56 0.2 0.1-0.2
6 0.20 YS20037 0.56 0.2 0.1-0.2
9 0.30 YS20037 0.56 0.2 0.1-0.2
12 0.40 YS20037 0.56 0.2 0.15-0.2
15 0.55 YS20037 0.56 0.2 0.2
18 0.80 YS20039 0.92 0.3 0.3
21 1.10 YS20040 1.09 0.5 0.5
24 1.60 YS20002 2.14 1.5 1-1.5
27 2.20 YS20002 2.14 1.5 1.5
30 3.20 YS20046 3.26 2 2
33 4.50 YS20007 4.50 3 3
36 6.30 YS20070 6.28 3 3
39 9.00 YS20069 9.17 5 5
42 12.50 YS20028 11.94 6 6
45 18.00 10 10

Why draft angle injection molding

  • Reduces the chance of damage to the part due to friction during release
  • Reduces wear and tear and chances of damage to the mold
  • Ensures a uniform, smooth, unscratched finish when required
  • Ensures the integrity and uniformity of other surface finishes and textures
  • Reduces overall cooling time by lessening or eliminating the need for unconventional ejection setups
  • Most, if not all, of these benefits offer either direct or indirect overall production cost reductions
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post VDI 3400 Surface VS Yick Sang Texture Comparison Chart appeared first on UPMOLD.

]]> Ra & Rz Roughness Specification https://upmold.com/surface-finish-ra-rz/ Wed, 20 Sep 2017 09:10:11 +0000 http://upmold.com/?p=8772 Surface finish Ra and Rz Roughness Specification  Roughness Average -Ra Ra is the arithmetic average of the absolute values of the profile heights over the evaluation length.  Ten Point Height of Irregularities - Rz(ISO)  RZ is the average value of the absolute values of the [...]

The post Ra & Rz Roughness Specification appeared first on UPMOLD.

]]>
surface-texture

Surface finish Ra and Rz Roughness Specification

 Roughness Average -Ra

Ra is the arithmetic average of the absolute values of the profile heights over the evaluation length.

Ra surface roughness

 Ten Point Height of Irregularities – Rz(ISO) 

RZ is the average value of the absolute values of the heights of five highest-profile peaks and the depths of five deepest alleys within the evaluation length.

Surface roughness terminology and parameters

Rz surface roughness

Ra and Rz are different parameters of roughness.

  • Ra is the average roughness of a surface.
  • Rz is the difference between the tallest “peak” and the deepest “valley” in the surface.

Ra vs Rz is like comparing inches to meters. They are not compatible. Use one or the other not both.

Surface roughness technical data

Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post Ra & Rz Roughness Specification appeared first on UPMOLD.

]]> VDI 3400 VS SPI Finish Surface https://upmold.com/vdi-3400-vs-spi-finish-surface-roughness-comparison/ Wed, 20 Sep 2017 06:30:10 +0000 http://upmold.com/?p=8766 SPI - VDI3400 surface roughness conversion | Minimum Drafting Angles EDM Mold Surface VDI 3400 Texture Surface finish VDI 3400 VDI texture mold standards SPI vs VDI finishes Surface roughness comparison chart VDI Mini draft angle chart VDI 3400 Depth Surface roughness conversion VDI 3400 ISO, VDI,ASA ISO/TC [...]

The post VDI 3400 VS SPI Finish Surface appeared first on UPMOLD.

]]>

SPI – VDI3400 surface roughness conversion | Minimum Drafting Angles

VDI 3400

ISO, VDI,ASA

ISO/TC 213

SPI

Polishing Grade

Drafting Angles

Charmilles

Ra=CLA=AA

Rz

RMS

PA

PC

ABS

CH

µm

µinch

µm

Tipo

µm

µinch

0.025

1

N1

A1

0.022-0.043

0.5-1

Grade #3 Diamond

0. 05

2

N2

A2

-0.08

1-2

Grade #6 Diamond

0

0. l

4

N3

A3

-0.3

2-7

Grade #15 Diamond

1

0. 11

4.48

2

0. 12

5.04

3

0. 14

5.6

4

0. 16

6.4

5

0. 18

7.2

6

0. 2

8

Bl

0.3-0.324

7-9. 75

600 Grit paper

7

0. 22

0. 25

8.8

10

N4

B2

-0. 422

9. 75-12

400 Grit paper

8

9

0. 28

0. 32

11.2

12.8

B3

-0.52

Dez-15

320 Grit paper

10

11

0. 35

14

16

l. 5

Cl

0.52-0.65

15-20.5

600 Stone

12

0.4

N5

0

1

0.5

13

0. 45

18

20

C2

-0.89

20.5-26

400 Stone

14

0. 5

15

0. 56

22.4

25.4

2.4

0.5

1

0.5

16

0.63

C3

-1.125

26-32

320 Stone

17

0.7

28

32

18

0.8

N6

Dl

1. 125-1.385

26-32

Dry Blast Glass Bead

0.5

1

0.5

19

0.9

36

40

20

1

D2

32-

Dry Blast # 240 Oxide

21

1.12

44.8

50.4

4. 7

0.5

1

0.5

22

1.26

23

1.4

56

64

24

1.62

6.5

N7

0 .5

1.5

1

25

1.8

72

80

26

2

27

2.2

88

100

10 .5

1

2

1.5

28

2.5

29

2.8

112

128

30

3.2

12.5

N8

D3

Dry Blast # 24 Oxide

1.5

2

2

31

3.5

140

160

32

4

33

4.5

180

17.5

2

3

2.5

34

5

200

224

35

5.6

36

6.3

252

280

24

N9

2.5

4

3

37

7

38

8

320

360

39

9

34

3

5

4

40

10

400

448

41

11.2

42

12.6

504

560

48

N10

4

6

5

43

14

44

16

640

760

45

18

69

5

7
Download PDF

China -Europe Surface Roughness Conversion Chart

mm)(China-micro.m) 0.025 0.05 0.1 0.2 0.4 0.8 1.6 3.2 6.3 12.5 25 50
(minch)(Europe-micro.inch) 1 2 4 8 16 32 63 125 250 500 1000 2000
N-Grade N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12
Finish Ground Finishes Smooth Turned Medium Turned Rough Machined

Chinese-American Surface Roughness Conversion Chart

Chinese Roughness(µm） Ra American Roughness（µm ）Ra American Roughness（ µinch），Ra
6.3 8.00 320
6.30 250
3.2 5.00 200
4.00 160
3.20 125
1.6 2.50 100
2.00 80
1.60 63
0.8 1.25 50
1.00 40
0.80 32
0.4 0.63 25
0.50 20
0.40 16
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post VDI 3400 VS SPI Finish Surface appeared first on UPMOLD.

]]>