Yick Sang Mold Texture – UPMOLD https://upmold.com Injection molding & mold making custom manufacture | Upmold Mon, 08 Feb 2021 05:37:24 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://upmold.com/wp-content/uploads/cropped-UP-logo-1-32x32.png Yick Sang Mold Texture – UPMOLD https://upmold.com 32 32 Yick Sang to VDI | Yick Sang Vs Mold-Tech https://upmold.com/yick-sang-to-vdi-vs-mold-tech/ Sat, 13 Oct 2018 16:48:44 +0000 http://upmold.com/?p=9306 Yick Sang(YS) to VDI | Yick sang Vs Mold-Tech Texture Yick Sang(YS) to VDI Vs Mold-Tech Yick Sang texture to VDI surface finish Grain Charmille VS Mold-Tech texture Agiecharmilles EDM Surface Finish Conversion to Yick Sang mold texture EDM sparking finish to Mold Tech texturing EDM surface VS Mold-tech Yick Sang [...]

The post Yick Sang to VDI | Yick Sang Vs Mold-Tech appeared first on UPMOLD.

]]>
mold tech texture

Yick Sang(YS) to VDI | Yick sang Vs Mold-Tech Texture

Yick Sang Texture Grain Charmille Mold-Tech Texture
VDI 18 K 9000G
YS 1282 VDI 21 K 9070G
YS 1283 VDI 24 K 7000G
YS 1284 VDI 27 K 7050G
YS 1285 VDI 30 K 5000G
YS 1286 VDI 33 K 2400G
YS 1287 VDI 36 MT 2260 (0.04mm)
VDI 39 MT 1055 (0.045mm)
VDI 42 MT 1013 (0.08mm)

Why draft angle injection molding

  • Reduces the chance of damage to the part due to friction during release
  • Reduces wear and tear and chances of damage to the mold
  • Ensures a uniform, smooth, unscratched finish when required
  • Ensures the integrity and uniformity of other surface finishes and textures
  • Reduces overall cooling time by lessening or eliminating the need for unconventional ejection setups
  • Most, if not all, of these benefits offer either direct or indirect overall production cost reductions
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post Yick Sang to VDI | Yick Sang Vs Mold-Tech appeared first on UPMOLD.

]]> Yick Sang Texture Specifications https://upmold.com/yick-sang-texture-standards/ Fri, 05 Oct 2018 08:48:32 +0000 http://upmold.com/?p=9157 Yick Sang (YS) Texture Standards Yick Sang YS-20001 series mold texture technical data sheet Yick Sang YS-20001 series texture surface roughness Yick Sang YS-20001 series texture draft angle chart Yick Sang YS-20001 series texture specifications Yick Sang YS-20001 series texture standards Yick Sang YS-20001 series mold texture polishing finish Yick Sang YS-20001 series texture guidelines Yick sang standards [...]

The post Yick Sang Texture Specifications appeared first on UPMOLD.

]]>
Yick Sang texture

Yick Sang (YS) Texture Standards

Series Number Ry (um) Rz (um) Ra (um) Draft Angle Polishing Finish
YS-20001 6.02 4.73 1.1 1° 1000#
YS-20002 11.65 7.96 2.14 1.5 ° 800#
YS-20003 13.61 9.09 2.75 2.5 ° 800#
YS-20004 17.38 13.24 3.85 2.5 ° 800#
YS-20005 18.8 13.85 3.85 3° 800#
YS-20006 17.68 12.54 3.53 3° 600#
YS-20007 20.17 15.35 4.5 3° 600#
YS-20008 23.81 16.49 4.75 4.5 ° 600#
YS-20009 34.82 27.8 8.26 3.5 ° 600#
YS-20010 24.97 18.6 5.46 3.5 ° 600#
YS-20011 26.63 19.5 5.55 4.5 ° 400#
YS-20012 37.71 29.23 8.77 4.5 ° 400#
YS-20013 23.81 21.03 5.72 3° 400#
YS-20014 26.94 23.37 6.2 3° 400#
YS-20015 21.56 17.52 5.35 3° 400#
YS-20016 30.23 29.84 7.77 4° 400#
YS-20017 22.86 20.56 4.88 4.5 ° 400#
YS-20018 20.01 18.25 4.4 5° 400#
YS-20019 12.4 8.51 2.26 1.5 ° 400#
YS-20020 13.54 9.35 2.79 2° 400#
YS-20021 18.8 13.46 3.94 2.5 ° 400#
YS-20022 23.66 17.67 4.99 3° 400#
YS-20023 32.47 24.5 6.91 5° 400#
YS-20024 30.31 21.2 6.37 4.5 ° 400#
YS-20025 35.82 27.67 7.8 6.5 ° 400#
YS-20026 35.07 28.18 7.51 7° 400#
YS-20027 26.92 22 7.05 4° 400#
YS-2028 47.82 38.72 11.94 4° 400#
YS-20029 36.82 3.36 8.96 3° 400#
YS-20030 31.56 27.7 7.9 3° 400#
YS-20031 28.62 31.9 7.9 4.5 ° 800#
YS-20032 30.28 25 8.86 3.5 ° 600#
YS-20033 34.73 31.13 10.28 3.5 ° 800#
YS-20034 31.13 25.03 5.67 8° 400#
YS-20035 35.65 33.8 7.65 9° 400#
YS-20036 33.64 26.15 6.77 11° 1000#
YS-20037 4.35 3.37 0.56 0.2 ° 1200#
YS-20038 4.28 3.64 0.69 0.2 ° 1200#
YS-20039 6.55 4.35 0.92 0.3 ° 1200#
YS-20040 7.76 5.54 11.09 0.5 ° 1000#
YS-20041 5.37 4.1 0.78 0.5 ° 1000#
YS-20042 8.09 5.32 1.2 1° 1000#
YS-20043 15.51 9.67 2.52 1.5 ° 1000#
YS-20044 12.9 8.17 2.19 1° 1000#
YS-20045 12.02 8.02 2.12 1.5 ° 1000#
YS-20046 19.3 12.93 3.26 2° 800#
YS-20047 14.39 9.53 2.56 1.5 ° 800#
YS-20048 15.18 10.03 2.65 1.5 ° 800#
YS-20049 34.24 30.59 8.96 3° 400#
YS-20050 34.87 32.44 8.09 3° 400#
YS-20051 27.95 25.19 6.9 4° 400#
YS-20052 25.06 21.56 5.74 3° 400#
YS-20053 23.99 18.6 4.61 3° 400#
YS-20054 30.01 25.17 6.98 4.5 ° 320#
YS-20055 22.99 14.32 2.61 3° 800#
YS-20056 26.03 17.35 4.81 2° 800#
YS-20057 23 15.7 4.14 2.5 ° 800#
YS-20058 25.85 18.12 4.97 3.5 ° 800#
YS-20059 27.52 18.42 5.4 3° 800#
YS-20060 35.12 24.76 6.55 3° 600#
YS-20061 27.08 18.57 4.88 4° 600#
YS-20062 30.58 21.48 6.27 3° 600#
YS-20063 24.32 20.84 6.73 3° 400#
YS-2064 21.55 17.42 5.51 3.5 ° 400#
YS-20065 25.73 22.62 6.75 3° 400#
YS-20066 21.4 18.22 5.51 3.5 ° 400#
YS-20067 15.53 11.59 3.3 1° 1000#
YS-20068 21.18 15.3 4.29 1.5 ° 800#
YS-20069 42.12 31.38 9.17 5° 400#
YS-20070 23.27 21.47 6.28 3° 600#
YS-20071 34.21 30.07 8.31 4.5 ° 400#
YS-20072 37.85 33.38 9.75 9° 320#
YS-20073 26.78 22.48 5.49 9° 400#
YS-20074 23.49 19.64 5.41 7° 400#
YS-20075 19.38 12.32 3.68 8° 320#
YS-20076 25.4 18.23 5.48 7° 320#
YS-20077 20.37 14.48 4.06 8° 320#
YS-20078 26.96 20.55 6.15 9° 320#
YS-20079 18.23 14.18 4.27 9° 320#
YS-20080 22.74 17.43 5.01 11° 320#
YS-20081 27.58 22.16 6.04 9° 320#
YS-20082 19.79 14.54 3.95 9° 320#
YS-20083 14.7 9.46 2.88 12° 320#
YS-20084 22.84 17.18 5.45 11° 320#
YS-20085 27.71 20.99 5.59 6° 400#
YS-20086 32.24 16.04 4.87 11° 320#
YS-20087 32.89 25.96 7.4 4.5 ° 400#
YS-20088 36.76 29.35 8.53 4.5 ° 400#
YS-20089 24.85 20.28 5.26 4° 400#
YS-20090 32.24 23.38 6.9 6.5 ° 400#
YS-20091 7.97 5.49 1.27 3° 400#
YS-20092 24.75 19.76 5.42 4.5 ° 400#
YS-20093 23.39 17.9 5.08 4.5 ° 400#
YS-20094 15.38 10.31 2.98 4° 400#
YS-20095 20.76 17.29 4.06 4° 400#

Why draft angle injection molding

  • Reduces the chance of damage to the part due to friction during release
  • Reduces wear and tear and chances of damage to the mold
  • Ensures a uniform, smooth, unscratched finish when required
  • Ensures the integrity and uniformity of other surface finishes and textures
  • Reduces overall cooling time by lessening or eliminating the need for unconventional ejection setups
  • Most, if not all, of these benefits offer either direct or indirect overall production cost reductions
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post Yick Sang Texture Specifications appeared first on UPMOLD.

]]> Yick Sang Texture Technology Datasheet https://upmold.com/yick-sang-texture-data-sheet/ Fri, 05 Oct 2018 04:12:54 +0000 http://upmold.com/?p=9131 Yick Sang Texture Technology Datasheet Yick Sang Texture is the Pioneers of the mold texturing in China, Yick Sang Texturing is used on multi-industry, such as: Automotive Mobile Household Electronic Office Yick Sang Surface Finish technology datasheet what is guiding the part and mould design with a correct draft [...]

The post Yick Sang Texture Technology Datasheet appeared first on UPMOLD.

]]>
Yick Sang texture

Yick Sang Texture Technology Datasheet

Yick Sang Texture is the Pioneers of the mold texturing in China, Yick Sang Texturing is used on multi-industry, such as:

  • Automotive
  • Mobile
  • Household
  • Electronic
  • Office

Yick Sang Surface Finish technology datasheet what is guiding the part and mould design with a correct draft angle for injection molding.

YS 1 Series Texture

1 Series Depth Draft Angle
YS1280 0.01 1
YS1281 0.02 1
YS1282 0.02 1.5
YS1283 0.03 1.5
YS1284 0.03 1.5
YS1285 0.03 2
YS1286 0.03 2
YS1287 0.04 2.5
YS1288 0.05 3
YS1289 0.06 3.5
YS1290 0.08 4.5
YS1291 0.04 2
YS1292 0.04 2
YS1293 0.04 2.5
YS1294 0.04 2.5
YS1295 0.05 2.5
YS1296 0.05 2.5
YS1297 0.05 2.5
YS1298 0.05 3
YS1299 0.05 3
YS1300 0.05 3
YS1301 0.05 3
YS1302 0.55 3

YS 2 Series Texture

2 Series Depth Draft Angle
YS2280 0.04 2.5
YS2281 0.04 2.5
YS2282 0.05 3
YS2283 0.04 2.5
YS2284 0.05 2.5
YS2285 0.06 3
YS2286 0.05 2.5
YS2287 0.05 3
YS2288 0.05 3
YS2289 0.07 4
YS2290 0.06 4
YS2291 0.07 4
YS2292 0.06 4
YS2293 0.06 4
YS2294 0.06 4
YS2295 0.08 5
YS2296 0.07 4.5
YS2297 0.07 4.5
YS2298 0.09 5.5
YS2299 0.08 5
YS2300 0.06 4
YS2301 0.08 5
YS2302 0.09 5

YS 3 Series Texture

Serie No. depth Draft Angle
YS3280 0.07 4.5
YS3281 0.06 4
YS3282 0.09 5.5
YS3283 0.09 5.5
YS3284 0.08 5
YS3285 0.13 7.5
YS3286 0.12 7.5
YS3287 0.12 7.5
YS3288 0.06 4
YS3289 0.15 9
YS3290 0.16 9.5
YS3291 0.05 3
YS3292 0.05 3
YS3293 0.08 4.5
YS3294 0.09 5.5
YS3295 0.08 5
YS3296 0.08 5
YS3297 0.08 5
YS3298 0.82 5
YS3299 0.08 5
YS3300 0.09 5.5
YS3301 0.09 5.5
YS3302 0.09 5.5

YS 4 Series Texture

Serie No. depth Draft Angle
YS4280 0.05 3
YS4281 0.05 3
YS4282 0.06 4
YS4283 0.08 4.5
YS4284 0.06 4
YS4285 0.07 4.5
YS4286 0.07 4.5
YS4287 0.08 4.5
YS4288 0.07 4.5
YS4289 0.08 5
YS4290 0.08 5
YS4291 0.05 3
YS4292 0.07 4.5
YS4293 0.06 5
YS4294 0.09 5.5
YS4295 0.08 5
YS4296 0.07 4.5
YS4297 0.08 5
YS4298 0.09 5.5
YS4299 0.08 5
YS4300 0.13 7.5
YS4301 0.13 7.5
YS4302 0.13 7.5

YS 5 Series Texture

Serie No. depth Draft Angle
YS5280 0.1 6
YS5281 0.09 5.5
YS5282 0.1 6
YS5283 0.13 7.5
YS5284 0.13 7.5
YS5285 0.13 7.5
YS5286 0.13 7.5
YS5287 0.13 7.5
YS5288 0.13 7.5
YS5289 0.15 9
YS5290 0.15 9
YS5291 0.1 6
YS5292 0.1 6
YS5293 0.1 6
YS5294 0.09 5.5
YS5295 0.1 6
YS5296 0.09 5.5
YS5297 0.2 12
YS5298 0.2 12
YS5299 0.09 5.5
YS5300 0.09 5.5
YS5301 0.2 12
YS5302 0.19 11

YS 6 Series Texture

Serie No. depth Draft Angle
YS6280 0.08 4.5
YS6281 0.13 7.5
YS6282 0.13 7.5
YS6283 0.11 7
YS6284 0.18 10
YS6285 0.11 7
YS6286 0.18 10
YS6287 0.18 10
YS6288 0.13 7.5
YS6289 0.2 12
YS6290 0.2 12
YS6291 0.06 3
YS6292 0.06 3
YS6293 0.12 7.5
YS6294 0.09 5.5
YS6295 0.1 5.5
YS6296 0.07 4.5
YS6297 0.11 7
YS6298 0.12 7.5
YS6299 0.12 7.5
YS6300 0.11 7
YS6301 0.12 7.5
YS6302 0.12 7.5

YS 7 Series Texture

Serie No. depth Draft Angle
YS7280 0.08 4.5
YS7281 0.07 5.5
YS7282 0.08 5
YS7283 0.09 5.5
YS7284 0.09 5.5
YS7285 0.1 6
YS7286 0.09 5.5
YS7287 0.08 5
YS7288 0.15 9
YS7289 0.19 11
YS7290 0.19 11
YS7291 0.07 4.5
YS7292 0.06 4
YS7293 0.07 4.5
YS7294 0.09 5.5
YS7295 0.08 5
YS7296 0.09 5.5
YS7297 0.13 7.5
YS7298 0.13 7.5
YS7299 0.13 7.5
Download PDF

YS 8 Series Texture

Serie No. depth Draft Angle
YS8280 0.01 0.2
YS8281 0.01 0.3
YS8282 0.01 0.5
YS8283 0.02 1
YS8284 0.02 1.5
YS8285 0.03 1.5
YS8286 0.03 1.7
YS8287 0.03 2
YS8288 0.03 2.2
YS8289 0.04 2.5
YS8290 0.04 3
YS8291 0.02 1
YS8292 0.02 1.5
YS8293 0.02 2
YS8294 0.02 2
YS8295 0.03 2.3
YS8296 0.03 2.5
YS8297 0.03 3
YS8298 0.04 3.2
YS8299 0.04 3.5
YS8300 0.04 3.5
YS8301 0.04 4
YS8302 0.05 4.5

Yick Sang Texture Catalogue

Yick Sang Texture Catalogue
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post Yick Sang Texture Technology Datasheet appeared first on UPMOLD.

]]> VDI 3400 Surface VS Yick Sang Texture Comparison Chart https://upmold.com/vdi-3400-surface-vs-yick-sang-texture-comparison-chart/ Wed, 26 Sep 2018 09:46:18 +0000 http://upmold.com/?p=9162 VDI 3400 Surface VS Yick Sang Texture Comparison Chart VDI Raum Yick Sang Texture Ra Minimum Draft Angle Recommended Draft  Angle 0 0.10 YS20037 0.56 0.2 0-0.2 3 0.15 YS20037 0.56 0.2 0.1-0.2 6 0.20 YS20037 0.56 0.2 0.1-0.2 9 0.30 YS20037 0.56 0.2 0.1-0.2 12 0.40 YS20037 0.56 0.2 0.15-0.2 [...]

The post VDI 3400 Surface VS Yick Sang Texture Comparison Chart appeared first on UPMOLD.

]]>
surface-finish-comparison

VDI 3400 Surface VS Yick Sang Texture Comparison Chart

VDI Raum Yick Sang Texture Ra Minimum Draft Angle Recommended Draft  Angle
0 0.10 YS20037 0.56 0.2 0-0.2
3 0.15 YS20037 0.56 0.2 0.1-0.2
6 0.20 YS20037 0.56 0.2 0.1-0.2
9 0.30 YS20037 0.56 0.2 0.1-0.2
12 0.40 YS20037 0.56 0.2 0.15-0.2
15 0.55 YS20037 0.56 0.2 0.2
18 0.80 YS20039 0.92 0.3 0.3
21 1.10 YS20040 1.09 0.5 0.5
24 1.60 YS20002 2.14 1.5 1-1.5
27 2.20 YS20002 2.14 1.5 1.5
30 3.20 YS20046 3.26 2 2
33 4.50 YS20007 4.50 3 3
36 6.30 YS20070 6.28 3 3
39 9.00 YS20069 9.17 5 5
42 12.50 YS20028 11.94 6 6
45 18.00 10 10

Why draft angle injection molding

  • Reduces the chance of damage to the part due to friction during release
  • Reduces wear and tear and chances of damage to the mold
  • Ensures a uniform, smooth, unscratched finish when required
  • Ensures the integrity and uniformity of other surface finishes and textures
  • Reduces overall cooling time by lessening or eliminating the need for unconventional ejection setups
  • Most, if not all, of these benefits offer either direct or indirect overall production cost reductions
Unscrewing Cap Plastic Injection Mould2018-03-17T09:28:08+00:00
unscrewing-container-plastic-injection-mould
Unscrewing Cap Plastic Injection Mould
Stool Plastic Injection Mold2018-03-17T09:28:08+00:00
Stool Plastic Injection Mold
Stool Plastic Injection Mold
Pipe Connection Plastic Injection Tooling2018-03-17T09:28:13+00:00
Pipe Connection Plastic Injection Tooling
Pipe Connection Plastic Injection Tooling
Medical Guard Part Plastic Injection Mould2018-06-30T06:36:33+00:00
Medical Guard Plastic Injection Mould
Medical Guard Part Plastic Injection Mould
Honda Automotive Plastic Injection Mold2018-03-17T09:28:14+00:00
Honda-car-plastic-injecton-mold
Honda Automotive Plastic Injection Mold
Honda Automotive Interior Trim Mould2018-03-17T09:28:14+00:00
Honda-car-interior-trim-tooling
Honda Automotive Interior Trim Mould
Honda Automotive Interior Cushion Mold2018-03-17T09:28:14+00:00
Honda-automotive-interior-cushion-mold
Honda Automotive Interior Cushion Mold
Automotive Instrument Injection Mould2018-03-17T09:28:16+00:00
automotive-instrument-injection-mold
Automotive Instrument Injection Mould
Automotive Bottle Holder Injection Mold2018-04-19T14:39:15+00:00
automotive-bottle-holder-injection-molds
Automotive Bottle Holder Injection Mold
Automotive Door Garnish Loudhailer Cover2018-03-17T09:28:30+00:00
Automotive Door Garnish Loudhailer Cover
Automotive Door Garnish Loudhailer Cover
Automotive Air Cleaner Combination2018-03-17T09:28:30+00:00
automotive-intake-port
Automotive Air Cleaner Combination
Automotive Radiator Tank2018-03-17T09:28:35+00:00
Automotive Tank Component
Automotive Radiator Tank
Automotive Engine Air Intake Manifold2018-03-17T09:28:37+00:00
Automotive-Engine-Air-Intake-Manifold
Automotive Engine Air Intake Manifold
Automotive B-Pillar Lower Trims2018-03-17T09:28:41+00:00
automotive-B-pillar-lower-trims
Automotive B-Pillar Lower Trims
Automotive B Pillar Upper Trim2018-03-17T09:28:41+00:00
automobilee-B-pillar-upper-trim
Automotive B Pillar Upper Trim
DFM Report For Automotive Head Light Housing Mold2018-04-16T06:24:59+00:00
DFM-Report for injection mold
DFM Report For Automotive Head Light Housing Mold
Automotive Grille Mold Flow Analysis Report2018-03-17T09:29:00+00:00
Automotive-Grille-Mold-Flow-Analysis Report
Automotive Grille Mold Flow Analysis Report
Automotive Interior Trim Bezel Mould Design2018-06-30T06:37:13+00:00
Automotive-Interior-Trim Bezel-Mould-Design
Automotive Interior Trim Bezel Mould Design
Automotive Door Trim Bezel Mold Design2018-03-17T09:29:04+00:00
Automotive-Door-Trim-Bezel-Mold-Design
Automotive Door Trim Bezel Mold Design
Automotive Light Housing Tooling Design2018-03-17T09:29:05+00:00
Automotive-Lighting-Housing-Injection-Mold-Design
Automotive Light Housing Tooling Design
Automotive Rear Light Housing Mold Tooling Design2018-03-17T09:29:05+00:00
Automotive-Rear-Light-Housing-Mold-Tooling-Design
Automotive Rear Light Housing Mold Tooling Design
Automotive Head Light Housing Tooling Mould Design2018-03-17T09:29:06+00:00
Lighting-housing-tooling-design
Automotive Head Light Housing Tooling Mould Design
Automotive Radiator Grille Tooling Mold Design2018-03-17T09:29:06+00:00
Grille-injection-mold-design
Automotive Radiator Grille Tooling Mold Design
Automotive Foot board2018-03-17T09:29:07+00:00
automotive-padal-plate
Automotive Foot board
Automotive Rear Door Center Frame2018-03-17T09:29:08+00:00
automotive door air bag lid
Automotive Rear Door Center Frame

The post VDI 3400 Surface VS Yick Sang Texture Comparison Chart appeared first on UPMOLD.

]]>