| ID |
Material Name |
Material Grade |
Charateristics |
Application |
Brand & Suppliers |
Density(g/cm3) |
Spec |
| 1 |
ABS |
ABS BASF Terluran GP-22 |
Terluran GP-22 is and easy-folw, general purpose injection molding grade with high resistance to impact and heat distortion |
intended for wide range of applications, particularly in the housings sector |
BASF |
1.04 |
 |
| 2 |
ABS |
ABS BASF Terluran GP-35 |
Terluran? GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio. |
Injection molding Thin wall components for telecommunications Household and sanitary appliances Toys Automotive components |
BASF |
1.04 |
|
| 3 |
ABS |
ABS Chimei 777D, Natural |
Heat resistance grade, Superheat resistance, impact strength |
Heating appliances shell, dry hair blow hair-dryer, iron shell, fan heater, auto parts, water tank cover |
Chimei |
1.06 |
|
| 4 |
ABS |
ABS Chimei PA-747R,Natural |
Extrusion grade,High impact strength, Special-shaped extrusion materials |
Luggage,suitcase,Refrigerator plate |
Chimei |
1.04 |
|
| 5 |
ABS |
ABS Chimei PA-757,Natural |
General purpose, High rigidity, High gloss,Impact strength |
Copy machine shell,phone,TV shell casing,cosmetics box,the tyre cover |
Chimei |
1.05 |
|
| 6 |
ABS |
ABS Chimei PA-758, clear |
Transparent grade |
Air conditioning panel, a washing machine cover, vacuum cleaner shell, shell 3 c products, home appliances, stationery |
Chimei |
1.07 |
|
| 7 |
ABS |
ABS Chimei PA-765A,Natural (UL94-V0) |
Fire prevention grade,High flow 1.5mm V-1 2.1mm V-0 2.1mm 5VB 2.5mm 5VA (TBBA) |
Power off display, set-top boxes, modem open panel, power outlet, car batteries, printer, cash register shell, electric meter shell shell, remote control, light boxes, fax machines, projectors |
Chimei |
1.05 |
|
| 8 |
ABS |
ABS Chimei 777B |
Heat resistance grade, High-impact strength |
Heating appliances shell, dry hair blow hair-dryer, iron shell, fan heater, auto parts, water tank cover |
Chimei |
1.06 |
|
| 9 |
ABS |
ABS Chimei PA-717C |
high impact |
Kitchen / audio products / washing machine / vacuum cleaner housings / tool handle accessories |
Chimei |
1.05 |
|
| 10 |
ABS |
ABS Chimei PA-737, Natural |
|
Displays, machine boxes, modems, power panels, power outlets, car batteries, cash register shells, printer casings, remote control, light boxes, fax machines |
Chimei |
1.04 |
|
| 11 |
ABS |
ABS Chimei PA-746H,Natural |
High flowability, high impact strength. |
Its specificity is similar to PA-747 / Excellent flowability, suitable for thin wall or complicated products, ex: side fender of motorcycle. |
Chimei |
1.03 |
|
| 12 |
ABS |
ABS Chimei PA-763,UL94-V0 |
Light-resistance heat-resistance high-impact 1.5mm V-0 2.5mm 5VA |
|
Chimei |
1.19 |
|
| 13 |
ABS |
ABS Sabic Cycolac FR15U, Natural |
Flame retardant ABS. Excellent indoor UV properties. Excellent moldability. UL94 V-0/5VA rated.ing. |
Auto parts (dashboard, tool doors, wheel cover, mirror box), radio chassis, telephone handle, type mechanical plate, vacuum cleaners, hair dryers, mixing machine, lawn mower |
Sabic |
1.19 |
|
| 14 |
ABS |
ABS Sabic MG47F |
FDA, UL94-HB |
FDA compliant |
Sabic |
1.04 |
|
| 15 |
ABS |
ABS TAIRILAC AG15A1 |
|
|
|
1.05 |
|
| 16 |
ABS |
ABS Terlux 2822HD |
Terlux 2822 HD is a new standard-injection molding grade based on a MABS polymer. Terlux 2822 HD offers a well-balanced combination of; Good resistance to chemicals; Good Stiffness and surface finish; High impact strength; HD service package available; Medical devices |
Medical/Healthcare Applications |
BASF |
1.08 |
|
| 17 |
ABS |
ABS Cycolac Resin HMG47MD |
|
|
SABIC |
1.05 |
|
| 18 |
ABS |
ABS LG AF312A-Flame Retardant |
Flame Retardant |
Electric/Electronic Applications (TV, Monitor Housing) IT/OA device |
LG |
1.19 |
|
| 19 |
ABS |
ABS RTP 600.5 |
|
|
RTP |
1.07 |
|
| 20 |
ABS |
ABS Sabic Cycolac AS35, Snowy White |
UV grade, High gloss, High flow |
Applied to machinery, cars, electronic appliances, instruments and meters, textile and construction and other industrial areas, is an extremely versatile thermoplastic engineering plastic. |
Sabic |
1.05 |
|
| 21 |
ABS |
ABS Structure Form Chimei PA-757 |
|
|
|
0.91 |
|
| 22 |
ABS |
ABS Structure Form Chimei PA-765A,(UL94-V0) |
|
|
|
0.91 |
|
| 23 |
ABS+10%GF |
ABS+10%GF Lupos GP2100 |
Flame retardant, flame rating |
Electric & Electronic (Housing, Components) |
LG |
1.1 |
|
| 24 |
ABS+30%GF |
ABS+30%GF LUPOS GP2300 |
Flame retardant, flame rating |
|
LG |
1.28 |
|
| 25 |
AL |
AL |
|
|
|
2.7 |
|
| 26 |
ASA |
ASA Luran S 757G |
Luran S 757G provides the best flowability within the product line and is therefore in particular suitable for demanding injection molding geometries. |
|
INEOS |
1.07 |
|
| 27 |
ASA |
ASA BASF Luran 757G |
best flowability, UV resistance, easy processing |
Household and sanitary appliance, Motor bicycle parts |
BASF |
1.07 |
|
| 28 |
ASA+PC |
ASA+PC SABIC GELOY HRA170 |
superior heat aging properties and colour stability |
|
SABIC |
1.15 |
|
| 29 |
ASA+PC |
PC+ASA Geloy HRA222F |
superior heat aging properties and colour stability |
|
SABIC |
1.17 |
|
| 30 |
ASB |
ASB HydroThane AL 25-80A |
|
|
HnG |
1.5 |
|
| 31 |
EPDM |
EPDM GP 30-A |
|
|
|
1.35 |
|
| 32 |
EPDM |
EPDM GP 35A |
|
|
|
1.35 |
|
| 33 |
EPDM |
EPDM PROFLEX |
|
|
PROFLEX |
0.91 |
|
| 34 |
EPDM |
EPDM PROFLEX TP30V |
|
|
PROFLEX |
0.96 |
|
| 35 |
EPDM |
EPDM PROFLEX TP50V |
|
|
PROFLEX |
0.91 |
|
| 36 |
EPDM |
EPDM Rubber 70-A |
|
|
|
1.2 |
|
| 37 |
GPPS |
GPPS POLYREX PG-383 |
POLYREX PG-383 is a General Purpose Polystyrene product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. |
|
Chimei |
1.05 |
|
| 38 |
PS |
GPPS Chimei PG-33, Clear |
General grade, General injection molding, Wear-resisting, cold resistant, drawing, processing and good mechanical, cold resistance, resistance to abrasion |
Lampshade, transparent food containers, cassette tape cartridge |
Chimei |
1.05 |
|
| 39 |
PE(HDPE) |
HDPE LG ME9180, Natural |
Complicated parts,light-weight household, High rigidity, injection molding |
General household products, large FRP products, industrial parts, disposable products, carrying case and so on |
LG |
0.958 |
|
| 40 |
HDPE |
HDPE Marlex 9006 |
|
|
Chevron Phillips |
0.953 |
|
| 41 |
HDPE |
HDPE DOW 25455N |
Food approval FDA 21 CFR |
Medical |
DOW |
0.96 |
|
| 42 |
PE(HDPE) |
HDPE Sabic M80064, Natural, FDA Compliant |
High liquidity, high stability, high impact toughness, high insulation, high plasticity and high cold resistance |
Used in electrical, chemical, food, machinery manufacturing, and agricultural, medicine and healthcare, family daily every aspect, such as injection molding |
Sabic |
0.964 |
|
| 43 |
PE(HDPE) |
HDPE Sidpec 6070 UA |
|
Crates Boxes Seats Pallets |
SIDPEC |
0.96 |
|
| 44 |
PE(HDPE) |
HDPE Taisu 8050, Natural |
High strength, high rigidity, good processability, good resistance to low-temperature brittle |
Beer case, carrying case, medical appliance, leisure tables and chairs, sports gear, plastic water tower, toys with components, industrial safety helmet |
Taisu |
0.96 |
|
| 45 |
PS |
HIPS Chimei PH-88, Clear |
Impact resistance grade, Heat resistance grade, high impact |
Daily necessities, toys, electronic products shell |
Chimei |
1.05 |
|
| 46 |
IXEF |
IXEF HC-1022 |
Ixef HC-1022 is a 50% glass-fiber reinforced, general purpose polyacrylamide compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance. |
Dental Applications, High Gloss Applications, Hospital Goods, Medical Devices, Medical/Healthcare Applications, Surgical Instruments |
SOLVAY |
1.64 |
|
| 47 |
LCP |
LCP LAPEROS?E130i |
High Heat Resistance, High Flow, Glass fiber reinforced, Standard |
|
Polyplastic |
1.61 |
|
| 48 |
LCP |
LCP VECTRA S475 | LCP | Mineral / Glass Reinforced |
Super High Flow, High Heat Resistance and Low Warp for Thin Parts. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural and black at 0.15mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electricals 130?C, mechanicals 130?C. UL = Underwriters Laboratories (USA) |
|
Celanese |
1.65 |
|
| 49 |
LCP |
LCP Vectra?S135 |
35% glass reinforced Vectra grade with very low outgassing, very high heat deflection temperature (335?C) and stiffness. Typical applications are lamp-sockets, lens holders for beamers, electrical and electronic parts like connectors, relays, switches, coil bobbins and also under the hood applications. |
|
Celanese |
1.67 |
|
| 50 |
PE(LDPE) |
LDPE Dow 722,Natural |
Low density,Low temperature resistance, most alkali erosion, water imbibition is small |
Injection products, turnover box, bottle caps, bucket hats, food containers, plates, dustbin, box, as well as the plastic flowers, blow molding products, extruded products |
Dow |
0.936 |
|
| 51 |
PE(LDPE) |
LDPE SAMSUNG HP800,UL94-V0,Black |
Extrusion grade,Good mechanical performance ,Crystallization, high resistance to impact, high stiffness, homopolymer and high liquidity |
Suitable for trucks, household goods, thin wall parts, container application |
Samsung |
0.923 |
|
| 52 |
LLDPE |
LLDPE ExxonMobil LLDPE LL 6201 Serie |
LL 6201 series are high flow LLDPE grades, which offer a unique combination of excellent processability and outstanding product properties. Parts manufactured from LL 6201 have good gloss and offer advantages in toughness, environmental stress crack resistance, stiffness and heat distortion resistance over comparable low density polyethylene items |
|
ExxonMobil |
0.926 |
|
| 53 |
MMBS |
MMBS-zylar 960 |
Zylar 960 is an impact modified styrene acrylic copolymer that provides toughness equivalent to some grades of polycarbonate, good clarity and superior processing characteristics for demanding injection molded applications. |
PPLICATIONS Appliances and consumer goods Medical devices Toys Office accessories Industrial housings and covers |
styrolution |
1.05 |
|
| 54 |
PA(Nylon) 6+60%GF |
PA(Nylon) 6+60%GF Durethan?BKV 60 H2.0 EF DUS060 |
PA(Nylon) 6, 60 % glass fibers, injection molding, improved flowability, heat-aging stabilized |
|
LANXESS |
1.7 |
|
| 55 |
PA(Nylon)6 |
PA(Nylon)6 Amilan CM1017 |
|
|
Toray |
1.29 |
|
| 56 |
PA(Nylon)6 |
PA(Nylon)6+15%GF Zytel 73G15L,NC010 |
15% Glass fiber reinforced polyamide 6 resin for injection molding, Gm, a good surface gloss, ultrasonic welding, good stiffness, high gloss, good strength and lubrication |
Electrical components, high gloss applications, industrial applications, sporting goods |
Dupont |
1.14 |
|
| 57 |
PA(Nylon)6 |
PA(Nylon)6+20%GF Amilan CM1001G-20 |
Nylon 6 filled with 20% glass fiber,good flow. |
Application in the automobile industry, textile and machinery manufacturing, chemical industry, electronic industry, etc |
Toray |
1.29 |
|
| 58 |
PA(Nylon)6 |
PA(Nylon)6+30%GF Zytel 73G30L NC010 |
30% Glass fiber reinforced polyamide 6 resin for injection molding. Thermoplastic, ultrasonic welding, high gloss, good strength and good rigidity |
Electrical components, high gloss applications, industrial |
Dupont |
1.36 |
|
| 59 |
PA(Nylon)6 |
PA(Nylon)6+33%GF BASF 8233G,Natural |
Resistance of high strength, toughness, resistance to impact, since embellish, good abrasion resistance and drug resistance, low temperature characteristics, has the self-extinguishing |
Application in the automobile industry, textile and machinery manufacturing, chemical industry, electronic industry, etc |
BASF |
1.39 |
|
| 60 |
PA(Nylon)66 |
PA(Nylon)66 LATAMID 66 H2 G/25-V0HF1 |
|
|
LATI |
1.4 |
|
| 61 |
PA(Nylon)66 |
PA(Nylon)66 Vydyne 21SPC |
FDA,Fast Molding cycle,High Rigidity,Oil Resistant. |
Applicate at many industrial,Bearings,Cams,Housing,Bushings,Connectors. |
Vydyne |
1.14 |
|
| 62 |
PA(Nylon)66 |
PA(Nylon)66 Zytel 101F NC010,Natural |
Fatigue resistance, good moldability, lubrication, fuel resistance, good processing properties, oil resistance, good chemical resistance, resistance to grease, release agent, high liquidity |
Widely used in machinery, instruments and meters, automobile parts, electronic electrical, railway, electrical appliances, communications |
Dupont |
1.14 |
|
| 63 |
PA(Nylon)66 |
PA(Nylon)66 Zytel 101L NC010,Natural |
Injection molding grade,Good electrical properties, low molecular weight, ultrasonic welding, good wear resistance, lubrication,The weathering resistance, high flow, rapid prototyping |
Electrical components, electrical and electronics applications, connectors, automotive applications, fasteners |
Dupont |
1.14 |
|
| 64 |
PA(Nylon)66 |
PA(Nylon)66 Zytel 105F BK010 |
Zytel? 105F BK010 is a lubricated, fast cycling, weather resistant PA 66 resin. Zytel? 105F BK010 contains finely dispersed carbon black. |
|
DuPont |
1.14 |
|
| 65 |
PA(Nylon)66 |
PA(Nylon)66 Zytel ST801A NC010 |
Zytel ST801A NC010A is a Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure |
|
Dupont |
1.07 |
|
| 66 |
PA(Nylon)66 |
PA(Nylon)66 Zytel ST801AHS NC010 |
|
|
DuPont |
1.08 |
|
| 67 |
PA(Nylon)66+13%GF |
PA(Nylon)66+13%GF Zytel 70G13HS1L NC010 |
|
|
Dupont |
1.23 |
|
| 68 |
PA(Nylon)66+13%GF |
PA(Nylon)66+13%GF Zytel 70G13L NC010 |
|
|
Dupont |
1.23 |
|
| 69 |
PA(Nylon)66 |
PA(Nylon)66+14%GF Zytel 8018 NC010 |
14% glass fiber reinforced, toughened, nylon 66 resin |
Electronic appliances, automobile, industrial parts, sports equipment, toys products |
Dupont |
1.19 |
|
| 70 |
PA(Nylon)66 |
PA(Nylon)66+20%GF BASF A3X2G5,Natural |
|
Electrical Parts |
BASF |
1.34 |
|
| 71 |
PA(Nylon)66 |
PA(Nylon)66+25%GF BASF A3X2G5,Natural |
Injection molding grade, 25% glass fiber reinforced, red phosphorus flame retardant, excellent mechanical properties and electric properties |
Electrical and electronic applications |
BASF |
1.34 |
|
| 72 |
PA(Nylon)66+30%GF |
PA(Nylon)66+30%GF Durethan?DP AKV 30 FN00 000000 |
PA 66, 30 % glass fibers, injection molding, halogen-free flame retardan |
|
LANXESS |
1.42 |
|
| 73 |
PA(Nylon)66 |
PA(Nylon)66+30%GF Zytel 70G30L NC010 |
30% Glass fiber reinforced polyamide 66 resin for injection molding. Thermoplastic, ultrasonic welding, high gloss, good strength and good rigidity |
Electrical components, high gloss applications, industrial |
Dupont |
1.36 |
|
| 74 |
PA(Nylon)66+30%GF |
PA(Nylon)66+30%GF Zytel 73G30T NC010 |
30% Glass Reinforced, Toughened, Polyamide 6 |
|
Dupont |
1.34 |
|
| 75 |
PA(Nylon)66 |
PA(Nylon)66+33%GF Vydyne R533 |
Higher head distortion temperature, resistance to creep and better dimensional stability,good chemical resistance,tensile strength and modulus properties |
used for many under-the-hood automotive applications,motor housings for power tools and garden appliances,also been used in miscellaneous brackets,gears and clips that require high rigidity and strength. |
Ascend |
1.4 |
|
| 76 |
PA(Nylon)66 |
PA(Nylon)66+33%GF Zytel 70G33HS1L NC010 |
33% Glass fiber reinforced polyamide 66 resin for injection molding,General, creep resistant performance is good, and smooth,heat stabilized. |
Electrical components, automobile application |
Dupont |
1.39 |
|
| 77 |
PA(Nylon)66 |
PA(Nylon)66+33%GF Zytel 70G33L NC010 |
33% Glass fiber reinforced polyamide 66 resin for injection molding,General, creep resistant performance is good, and smooth |
Electrical components, automobile application |
Dupont |
1.39 |
|
| 78 |
PA(Nylon)66+40%GF |
PA(Nylon)66+40%GF Minlon 10B40HS1 NC010 |
|
|
Dupont |
1.51 |
|
| 79 |
NYLON |
NYLON ESD A 204 H PMS BLACK COLOR |
|
|
RTP |
1.32 |
|
| 80 |
PA(Nylon)6 |
PA(Nylon)6 B30S Bayer |
|
|
Bayer |
1.15 |
|
| 81 |
PA(Nylon)6 |
PA(Nylon)6 Durethan B30S |
|
|
Lanxess |
1.15 |
|
| 82 |
PA(Nylon)6 |
PA(Nylon)6 MITSUBISHI 1010C2 |
|
|
MITSUBISHI |
1.13 |
|
| 83 |
PA(Nylon)6+30%GF |
PA(Nylon)6+30%GF Akulon K224-HG6 |
Flame Rated; Heat Stabilizer |
Automotive |
DSM |
1.35 |
|
| 84 |
PA(Nylon)6/PA(Nylon)66 |
PA(Nylon)6/PA(Nylon)66 LATAMID 68 H2-V0 Natural |
Heat stabilised. UL94 V10 classified, halogens1based flame retardants and red phosphorous free. Good surface appearance |
|
LATI |
1.16 |
|
| 85 |
PA(Nylon)66 |
PA(Nylon)66 LATAMID 66 H2 G/25-V0KB3 |
Compound based on Polyamide 66 (PA 66). Heat stabilised. Glass fibres. UL94 V-0 classified, with red phosphorous. Product UL certified. |
|
LATI |
1.33 |
|
| 86 |
PA(Nylon)66 |
PA(Nylon)66 Zytel 105F BK010 |
Zytel? 105F BK010 is a lubricated, fast cycling, weather resistant PA 66 resin. Zytel? 105F BK010 contains finely dispersed carbon black. |
|
DuPont |
1.14 |
|
| 87 |
PA(Nylon)66 |
PA(Nylon)66 Zytel FG101L NC010 |
|
|
Dupont |
1.14 |
|
| 88 |
PA(Nylon)66 |
PA(Nylon)66 Zytel HTN51G35HSL NC010 |
It is a high performance, semicrystalline, heat stabilized, 35% glass fibre. |
|
Dupont |
1.47 |
|
| 89 |
PA(Nylon)66 |
PA(Nylon)66 Zytel ST801AHS NC010 |
|
|
DuPont |
1.08 |
|
| 90 |
PA(Nylon)66+10%GF |
PA(Nylon)66+10%GF Local |
|
|
Local |
1.23 |
|
| 91 |
PA(Nylon)66 |
PA(Nylon)66+14%GF Zytel 8018HS NC010 |
14% glass fiber reinforced, toughened, heat stabilized nylon 66 resin |
Electronic appliances, automobile, industrial parts, sports equipment, toys products |
Dupont |
1.19 |
|
| 92 |
PA(Nylon)66+25%GF |
PA(Nylon)66+25%GF Latamid?H2 G/25-V0KB3 |
Compound based on Polyamide 66 (PA 66). Heat stabilised. Glass fibres. UL94 V-0 classified, with red phosphorous. Product UL certifie |
|
Latamid |
1.33 |
|
| 93 |
PA(Nylon)66-30%CF |
PA(Nylon)66+30%CF Sabic RC006 |
|
|
Sabic |
1.28 |
|
| 94 |
PA12 |
PA12 Grilamid LV-3H |
Grilamid LV-3H is a Polyamide 12 (Nylon 12) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. |
|
EMS |
1.22 |
|
| 95 |
PA12+50%GF |
PA12+50%GF Grilamid LV-5H |
Grilamid? LV-5H is a Polyamide 12 (Nylon 12) material filled with 50% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. |
Typical applications include: Automotive, Electrical/Electronic Applications, Appliances, Consumer Goods, Engineering/Industrial Parts |
EMS |
1.47 |
|
| 96 |
PA6 |
PA6 RTP 200 H FR |
|
|
RTP |
1.26 |
|
| 97 |
PA66+2% moly |
ZZ-PA66+2% moly RN001XXC |
|
|
Sabic |
1.16 |
|
| 98 |
PBT |
PBT BASF Ultradur B4500, Natural |
Medium viscosity grade, Extrusion, medical, food grade |
For extrusion film medical packaging, as well as thin wall profiles, pipes, FDA food certification |
BASF |
1.30 |
|
| 99 |
PBT |
PBT Sabic VALOX 357, Natural |
PBT+PC, Flame Retardant, Impact Modified, Opaque, unreinforced |
Computer keyboard, cooling equipment, liquid delivery systems, automotive parts, electrical connectors, industrial systems and control |
Sabic |
1.34 |
|
| 100 |
PBT |
PBT Sabic VALOX 420SEO, Natural |
30% GR, UL94V-0/5V rated. Numerous applications; edge trimmers, food mixer motor stator and commutator, cooling fan, connectors, bobbins, switches etc |
Home appliances:electrical cabinet, fuse box, computer keyboard keys, etc., the auto industry: the radiator shutters, panels, wheel cover, car body, door parts, etc. |
Sabic |
1.60 |
|
| 101 |
PBT |
PBT Sabic VALOX DR48-1001 |
17% glass reinforced, flame retardant grade UL-94 rated V-0/5VA. |
|
SABIC |
1.53 |
|
| 102 |
PBT |
PBT Celanex 2016 |
Celanex 2016 is a non-exuding flame retarded (UL and CSA approved V-0 at 1/32 inch and 5V at 1/8 inch), unreinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited for electrical connector applications where UL approved 50% regrind use capability makes maximum use of purchased product. |
|
Celanese |
1.44 |
|
| 103 |
PBT |
PBT VALOX ENH4560 Natural |
VALOX* ENH4560 resin is a non-brominated/non-chlorinated flame retardant product based on VALOX* PBT resin |
|
SABIC |
1.56 |
|
| 104 |
PBT+15%GF |
PBT+15%GF VALOX ?855 |
|
|
SABIC |
1.54 |
|
| 105 |
PBT+20%GF |
PBT+20%GF VALOX 451E resin |
VALOX 451E is 20% glass reinforced, flame retardant PBT injection moulding resin |
|
SABIC |
1.54 |
|
| 106 |
PBT+25%GF |
PBT+25%GF VALOX? ENH4550 |
|
|
SABIC |
1.52 |
|
| 107 |
PBT |
PBT+30%GF BASF B4300G6 Natural |
Easy flowing injection molding grade with 30% glass fibers,for rigid,tough and dimensionally stable technical parts. |
windshield wiper arms,printed circuit boards PCB, housing, consoles, contact carriers, covers. |
BASF |
1.53 |
|
| 108 |
PBT-30%GF |
PBT+30%GF Celanex 3300D |
Polybutylene terephthalate that offers a superior combination of mechanical, electrical, and thermal properties. This grade provides outstanding processability and good chemical resistance. |
|
Ticona |
1.53 |
|
| 109 |
PBT |
PBT+30%GF Ticona Celanex 3316,Natural |
Flame retardant , performance stability, mechanical strength, electrical insulating properties, thermal stability, weatherability, drug resistance, low water absorption, good gloss |
Is mainly used in automobile, electronic appliances, industrial machinery and polymer alloy, task forces, industrial, transport machinery parts, baking furnace parts, electric tool parts, shielding cover, etc |
Ticona |
1.3 |
|
| 110 |
PBT+30%GF |
PBT+30%GF VALOX 553 |
30% GR PBT+PC, UL94 V-0. Reduced warpage characteristics.Applications; appliance handles, spotlights, electric motors, pump housings, etc. |
|
SABIC |
1.59 |
|
| 111 |
PBT+30%GR |
PBT+30%GR VALOX Resin 420 |
30% GR, excellent strength, stiffness and dimensional stability. High heat resistance. Appliance handles, spotlights, electric motors, connectors |
|
SABIC |
1.53 |
|
| 112 |
PBT+PC |
PBT+PC VALOX Resin 357U |
PBT+PC, UL94V-0/5VA Rated, Impact Modified, Opaque, Unreinforced, UV Stabilized. Applications like bobbins, switches and enclosures |
|
SABIC |
1.34 |
|
| 113 |
PBT+PC |
PBT+PC RTP 2099 X 137440 |
|
|
RTP |
1.44 |
|
| 114 |
PPBT+PC |
PBT+PC Sabic V3900WX 1001 |
|
|
Sabic |
1.35 |
|
| 115 |
PBT+PC |
PBT+PC Sabic V3900WX-GY8G042 |
|
|
Sabic |
1.35 |
|
| 116 |
PBT+PC |
PBT+PC Sabic V3901WX |
|
|
Sabic VALOX |
1.3 |
|
| 117 |
PC |
PC Chimei PC 110V |
For general injection application |
Electrical appliance |
Chimei |
1.2 |
|
| 118 |
PC |
PC Chimei PC-110,Natural |
General grade,General injection molding |
Auto warning light shell, mouse, holding box of chocolate, high heels. |
Chimei |
1.19 |
|
| 119 |
PC |
PC Chimei PC-122, Natural |
For General Injection Molding |
External pen tubing / stationery / toys / water containers / thin wall products / complex transparent molding products |
Chimei |
1.2 |
|
| 120 |
PC |
PC Colorfast PC200 |
|
|
LTL |
1.2 |
|
| 121 |
PC |
PC CTC 512HF |
good mechanics ability;good heat stable ability;good flowing ability. |
|
CTC |
1.2 |
|
| 122 |
PC |
PC Docolor IR700C18 |
|
|
Docolor |
1.2 |
|
| 123 |
PC |
PC EXL1132T |
LEXAN EXL1132T resin offer good low temperature (-20C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC resins.LEXAN EXL 1132T resin is a general purpose product available in transparent and opaque colors and may be an excellent candidate for a broad range of applications. |
|
SABIC |
1.19 |
|
| 124 |
PC |
PC EXL1414 |
This resin offers extreme low temperature (-40 C) ductility in combination with excellent processability and release |
low temperature |
Sabic |
1.19 |
|
| 125 |
PC |
PC EXL9330 |
Opaque PC-Siloxane copolymer with excellent processability.Non-chlorinated,non-brominated flame retardant product in most colors.UV-stabilized.UL rated f1/V-0/5VA. |
|
SABIC |
1.19 |
|
| 126 |
PC |
PC EXL9330 7T8D832 |
Opaque PC-Siloxane copolymer with excellent processability.Non-chlorinated,non-brominated flame retardant product in most colors.UV-stabilized.UL rated f1/V-0/5VA. |
|
SABIC |
1.18 |
|
| 127 |
PC |
PC Iupilon HL7002 |
|
|
Iupilon |
1.2 |
|
| 128 |
PC |
PC Iupilon S-3000 |
|
|
Iupilon |
1.2 |
|
| 129 |
PC |
PC LEXAN 940 |
|
|
SABIC |
1.21 |
|
| 130 |
PC |
PC LEXAN EXL1414T |
LEXAN EXL1414T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature (-40 °C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN EXL1414T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications. |
|
SABIC |
1.19 |
|
| 131 |
PC |
PC LEXAN 104, FDA |
FDA food contact compliant in limited colors |
|
Sabic |
1.2 |
|
| 132 |
PC |
PC LEXAN 123R |
UL rated HB as of 10/97. 200 series recommended when V-2 rating required. Nonhalogenated. 17.5 MFR, for small, intricate parts. UV stabilized. Internal mold release. |
|
Sabic |
1.2 |
|
| 133 |
PC |
PC LEXAN 141,clear |
High clear,Good at Fracture Resistance |
Used for CD, sunglasses, optics lens, auto headlights, and safety components, office machinery, home appliances, electronic components. |
Sabic |
1.2 |
|
| 134 |
PC |
PC LEXAN 143R |
200 series recommended when V-2 rating required. Nonhalogenated. 10.5 MFR. UV-stabilized. |
|
Sabic |
1.2 |
|
| 135 |
PC |
PC LEXAN 241R |
Improved flame retardance. Internal mold release |
|
Sabic |
1.2 |
|
| 136 |
PC |
PC LEXAN 243R |
|
|
SABIC |
1.20 |
|
| 137 |
PC |
PC LEXAN 500R,Natural |
10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance. Internal mold release. |
Used for CD, sunglasses, optics lens, auto headlights, and safety components, office machinery, home appliances, electronic components, food appliances, medical equipment |
Sabic |
1.21 |
|
| 138 |
PC |
PC LEXAN 505R |
LEXAN 505R contains non-chlorinated,non-brominated flame retardant systems with UL-94 V0 rating at 1.5mm.It is available in various opaque color options for high stiffness applications. |
|
Sabic |
1.26 |
|
| 139 |
PC |
PC LEXAN 920A resin |
Low viscosity injection moldable, flame retardant PC. Exceptional surface appearance. Clear, tints and opaque colors. |
|
Sabic |
1.21 |
|
| 140 |
PC |
PC LEXAN 923A |
Low viscosity, flame retardant with exceptional surface. Clear, tints and opaque colors. UV-stabilized. |
|
Sabic |
1.21 |
|
| 141 |
PC |
PC LEXAN 940A,Natural |
Medium viscosity, flame retardant PC. Exceptional surface. Clear, tints and opaque colors |
Used in industry, household appliances, electrical appliances, auto parts |
Sabic |
1.21 |
|
| 142 |
PC |
PC LEXAN 945 |
LEXAN 945 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in various opaque color options. LEXAN 945 is a general-purpose resin designed to meet the needs of various applications. |
|
SABIC |
1.19 |
|
| 143 |
PC |
PC LEXAN 945A |
LEXAN 945A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and tinted color options. LEXAN 945A is a general-purpose resin designed to meet the needs of various applications |
|
SABIC |
1.19 |
|
| 144 |
PC |
PC LEXAN 945U |
LEXAN 945A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and tinted color options. LEXAN 945A is a general-purpose resin designed to meet the needs of various applications |
|
SABIC |
1.19 |
|
| 145 |
PC |
PC LEXAN-3413R resin |
30% GR, provides improved mechanical properties and UL94V-1 rated at 0.058″. Internal mold release added. |
|
SABIC |
1.43 |
|
| 146 |
PC |
PC LEXAN SLX2432T |
Medium viscosity pc copolymer with enhanced UV stabilization and added release agent |
|
SABIC |
1.20 |
|
| 147 |
PC |
PC LEXAN-HF1140 |
Good clarity, heat resistance, property retention and dimensional stability. FDA food contact compliant in limited colors. |
used for medical applications which require biocompatibility |
SABIC |
1.20 |
|
| 148 |
PC |
PC LEXAN HP1 resin |
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO sterilizable. Contains mold release |
|
SABIC |
1.20 |
|
| 149 |
PC |
PC LNP FARADEX Compound DS0036I |
|
|
SABIC |
1.29 |
|
| 150 |
PC |
PC LUPOY GP1006FM |
|
|
LG |
1.21 |
|
| 151 |
PC |
PC Makrolon 2407 |
UV stabilizer,good Mold Release,Low Viscocity |
General purpose,UV stalbilizer |
Bayer |
1.2 |
|
| 152 |
PC |
PC Makrolon 6557 |
|
|
Bayer |
1.2 |
|
| 153 |
PC |
PC Makrolon PC 2805,Natural |
Demoulding performance good, medium viscosity, injection or extrusion molding, coloring, colorless, transparent, translucent, good thermal stability |
Used in industry, auto parts accessories, electronic accessories, UL certification，Disc material, instrument shell and office automation equipment, polymer optical fiber core material |
Bayer |
1.20 |
|
| 154 |
PC |
PC Makrolon RX1805 451118 |
|
|
Bayer |
1.20 |
|
| 155 |
PC |
PC Makrolon 2405 |
General purpose; low viscosity;easy release;available in transparent, translucent and opaque colors. |
|
Bayer |
1.2 |
|
| 156 |
PC |
PC Makrolon 2458-550115, Clear |
Medical injection molding grade, Low viscosity, can radiation sterilization, high liquidity, hydrolysis resistance, food contact compliance, demoulding performance is good |
Medical equipment/healthcare applications, electronic appliances, CD plates, shells, signal cylinder, telephone switches, home appliance, Industrial components: camera ontology, machine shell, helmet, goggles, safety glasses. |
Bayer |
1.20 |
|
| 157 |
PC |
PC Makrolon 2858 |
Medium flowing BgVV and FDA injection molding grade, for food contact applications, better resistance to hot water |
Medical devices, Suitable for ETO and steam sterilization at 121 degree C, Complies with the requirements of FDA modified ISO 10993 1 and USP Class VI, Medium viscosity |
Bayer |
1.2 |
|
| 158 |
PC |
PC Makrolon 6265 X |
MVR (300 ?C/1.2 kg) 19 cm?/10 min; chlorine- and bromine-free flame retardancy; UL 94V-0/1.5 mm; low viscosity; easy release; injection molding – melt temperature 280 – 320 ?C; available in opaque colors only |
|
Bayer |
1.2 |
|
| 159 |
PC |
PC Makrolon 6555 |
flame retardant,UL 94V0,medium viscosity;easy release |
|
Bayer |
1.2 |
|
| 160 |
PC |
PC Makrolon Rx2530 |
MVR (300 C/1.2 kg) 15 cm?/10 min; medical devices; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; injection molding – melt temperature 280 – 320 ?C; transparent parts for medical devices |
|
Bayblend |
1.20 |
|
| 161 |
PC |
PC SABIC LS2 |
LEXAN LS2 is a medium viscosity grade especially designed for applications with high optical requirements in terms of clarity and light transmission. |
|
SABIC |
1.2 |
|
| 162 |
PC |
PC TEIJIN L-1225 Z100 |
|
|
TEIJIN |
1.20 |
|
| 163 |
PC |
PC TRISTAR PC-10FRN |
TRISTAR PC-10FRN is a Polycarbonate(PC) product.It can be processed by injection molding and is available in Africa & Middle East,Asia Pacific,Europe,Latin America,or North America.Applications of TRISTAR PC-10FRN include electrical/electronic applications and wire & cable. |
|
TRISTAR |
1.23 |
|
| 164 |
PC |
PC+10%GF Makrolon 9415 |
|
|
BAYER |
1.23 |
|
| 165 |
PC+20%GF |
PC+20%GF Lexan resin 3412ECR |
Lexan 3412ECR Polycarbonate (PC) resin is a 20% glass fiber filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant GF-PC has an UL-94 V0 rating and is available in various opaque color options. Lexan 3412ECR is a resin designed to meet the needs of high stiffness applications. |
|
SABIC |
1.3 |
|
| 166 |
PC |
PC+30%GF LEXAN 3413R |
30% GR, provides improved mechanical properties and UL94V-1 rated at 0.058″. Internal mold release added. |
|
Sabic |
1.23 |
|
| 167 |
PC+ABS |
PC+ABS Cycolac C2950,Black |
Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced flow and impact plus improved heat resistance intended for various applications. |
Widely used in the manufacture of telephone, mobile phones, pagers, TV sets, washing machines, tape recorders，Radio, photocopiers, fax machines, toys and kitchen supplies such as shell. |
Sabic |
1.15 |
|
| 168 |
PC/ABS |
PC+ABS CYCOLOY C1200HF,Natural |
PC+ABS, Excellent flow/impact/high heat resistance. Low temperature ductility. For automotive, appliance and electrical components. |
Electrical/electronic applications, home appliance parts, car in the field of application |
Sabic |
1.12 |
|
| 169 |
PC+ABS |
PC+ABS Bayblend FR3010 |
Blend; unreinforced; flame*retardant; increased heat resistance; UL recognition 94V-0; glow wine test ; improved chemical resistance and stress cracking behavior; successor to FR2010. |
|
Bayer |
1.18 |
|
| 170 |
PC+ABS |
PC+ABS Bayblend T65 XF |
|
|
Bayblend |
1.13 |
|
| 171 |
PC+ABS |
PC+ABS Bayblend T85 XF |
|
|
Bayblend |
1.14 |
|
| 172 |
PC/ABS |
PC+ABS Chimei PC-365 |
General grade,General injection molding with UL94 HB 1.5 mm and 3.0 mm HB |
Automotive interior parts, electronic products shell, mobile phone shell, general FRP products |
Chimei |
1.19 |
|
| 173 |
PC/ABS |
PC+ABS Chimei PC-510,Natural |
Fire prevention grade,High liquidity 1.5 mm V-0, 2.1 mm 5 VB does not contain halogen flame retardant materials |
Set-top boxes, projector, 3 c digital products, transformers, TV game, CNC products |
Chimei |
1.16 |
|
| 174 |
PC/ABS |
PC+ABS Chimei PC-540 V0 |
High heat, 1.5mm V-0, 2.0 mm 5VB Halogen-free flame retardant material |
Set-top box / Projector / Computer, communication, consumer electronics product / Video game console / Networking product |
Chimei |
1.18 |
|
| 175 |
PC+ABS |
PC+ABS Cycolac C2950 |
Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced flow and impact plus improved heat resistance intended for various applications. |
Widely used in the manufacture of telephone, mobile phones, pagers, TV sets, washing machines, tape recorders，Radio, photocopiers, fax machines, toys and kitchen supplies such as shell. |
Sabic |
1.15 |
|
| 176 |
PC+ABS |
PC+ABS CYCOLOY C2800 |
|
|
SABIC |
1.17 |
|
| 177 |
PC/ABS |
PC+ABS CYCOLOY XCY620S |
Automotive applications |
|
Sabic |
1.14 |
|
| 178 |
PC/ABS |
PC+ABS CYCOLOY 5200 |
Non-chlorinated, nonbrominated flame retardant |
Offering balanced heat, flow and impact to meet various application needs. |
Sabic |
1.18 |
|
| 179 |
PC+ABS |
PC+ABS CYCOLOY LG9000,Black |
PC+ABS blend,Low gloss and UV stable,suitable for automotive interior applications. |
Widely used in automotive interior parts, office machinery, communications equipment, household appliances and lighting equipment, mobile phone casing, computer and business machines shell, electrical equipment, lawn, garden machinery |
Sabic |
1.13 |
|
| 180 |
PC+ABS |
PC+ABS Cycoloy* Resin C6800 |
|
|
Sabic |
1.19 |
|
| 181 |
PC+ABS |
PC+ABS Sabic C6200, natural |
CYCOLOY C6600 is a FR PC+ABS of nonbrominated, nonchlorinated flame retardant systems with balanced flow, impact and hydrolytic stability |
wide variety of applications including business equipment, monitors, enclosures, among others |
Sabic |
1.19 |
|
| 182 |
PC+ABS |
PC+ABS Sabic C6600, natural |
CYCOLOY C6600 is a FR PC+ABS of nonbrominated, nonchlorinated flame retardant systems with balanced flow, impact and hydrolytic stability |
wide variety of applications including business equipment, monitors, enclosures, among others |
Sabic |
1.19 |
|
| 183 |
PC |
PC-Lexan hps1-1h1124 |
|
|
Sabic |
1.22 |
|
| 184 |
PC |
PC-Lexan Resin 943A |
|
|
Sabic |
1.217 |
|
| 185 |
PC/PBT |
PC/PBT RTP 2099 X 137440 |
|
|
RTP |
1.44 |
|
| 186 |
PC/PBT |
PC/PBT Sabic V3900WX 1001 |
|
|
Sabic |
1.35 |
|
| 187 |
PC/PBT |
PC/PBT Sabic V3900WX-GY8G042 |
|
|
Sabic |
1.35 |
|
| 188 |
PC/PBT |
PC/PBT Sabic V3901WX |
|
|
Sabic VALOX |
1.3 |
|
| 189 |
PC/PET |
PC/PET XENOY?XL1339 resin |
Data generated in BOZ labs. High heat grade for nonchemical resistance required applications |
|
SABIC |
1.22 |
|
| 190 |
PCTG |
PCTG Eastman Tritan Copolyester TX1501HF |
|
|
Eastman |
1.18 |
|
| 191 |
PEBA |
PEBA PEBAX 3533 SA 01 MED |
Polyether block amide Pebax ? 3533 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided. |
MAIN APPLICATIONS ? Arterial catheters. ? Flexible injected parts. |
Arkema |
1 |
|
| 192 |
PEBA |
PEBA PEBAX 5533 SA 01 MED |
|
MAIN APPLICATIONS, Tubings like angiography and angioplasty catheters. Flexible injected parts. |
Arkema |
1.01 |
|
| 193 |
PEEK |
PEEK Victrex 450G |
|
|
Victrex |
1.3 |
|
| 194 |
PEEK |
PEEK Victrex PEEK 150G903 Black |
Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications |
|
Victrex |
1.26 |
|
| 195 |
PEI |
PEI ULTEM 2100R |
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. |
|
SABIC |
1.34 |
|
| 196 |
PEI |
PEI ULTEM 2200R |
|
|
SABIC |
1.42 |
|
| 197 |
PEI |
PEI ULTEM 2300 |
|
|
SABIC |
1.51 |
|
| 198 |
PEI |
PEI-ULTEM Resin 1000 |
?ULTEMTM 1000 resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEMTM 1000 resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures. |
|
SABIC |
1.27 |
|
| 199 |
PEI |
ULTEM Resin 2400 |
|
|
Sabic |
1.61 |
|
| 200 |
PES |
PES Veradel? 3330GF |
Veradel 3330GF is a 30% glass fiber reinforced grade of polyethersulfone (PESU). Adding glass fiber to polyethersulfone substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the material, while maintaining most of its other basic characteristics. The combination of structural properties and cost-effectiveness make this resin an attractive alternative to metals in many engineering applications |
|
Solvay |
1.58 |
|
| 201 |
PESU-GF30 |
PESU-GF30 BASF Ultrason E2010 G6 UN |
|
|
BASF |
1.6 |
|
| 202 |
PET |
PET CB-602 |
|
|
Local |
1.42 |
|
| 203 |
PET |
PET Dupont FR530 NC010 |
|
|
Dupont |
1.68 |
|
| 204 |
PET |
PET Rynite FR530 NC010 |
30% Glass Reinforced, Flame Retardant, Polyethylene Terephthalate |
|
Dupont |
1.68 |
|
| 205 |
PETG |
PETG Easter 6763 |
|
|
Eastman |
1.27 |
|
| 206 |
POE |
POE Dow ENGAGE 8150 |
|
|
Dow |
0.87 |
|
| 207 |
PMMA |
PMMA Arkema Plexiglas DR-101, Clear |
Good Toughness, high heat resistance; high impact resistance. |
Appliances;Household Goods;Automotive Appliances;Labels |
Arkmea |
1.15 |
|
| 208 |
PMMA |
PMMA Chimei CM-207, Clear |
General purpose injection grade, USES the most extensive, with appropriate liquidity and heat resistance |
Electronic nameplate, general audio panels, mechanical parts, instrument shell, sunglasses, the electronic surface crust |
Chimei |
1.19 |
|
| 209 |
PMMA |
PMMA Chimei CM-211,Clear |
High flow injection grade, liquidity characteristics, Easy to molding & Tooling |
Electronic nameplate, general audio panel, household utensils, and decoration of the influential special difficult to injection molding processing |
Chimei |
1.19 |
|
| 210 |
PMMA |
PMMA Evonik-Plexiglas zk6BR-E,Clear |
High liquidity, good surface glossiness, and good weatherability |
Used for extruding and coextruding sheets and profiles as well as for injection molding,appliance housings, coextruded profiles for window frames, gutters, downspouts, and housewares such as cutlery handles, bowls |
Evonik |
1.16 |
|
| 211 |
PMMA |
PMMA LG IF850, clear |
|
|
LG |
1.18 |
|
| 212 |
PMMA |
PMMA Plexiglas Resist zk6BR |
?High liquidity, good surface glossiness, and good weatherability |
?Used for extruding and coextruding sheets and profiles as well as for injection molding,appliance housings, coextruded profiles for window frames, gutters, downspouts, and housewares such as cutlery handles, bowls |
Evonik |
1.16 |
|
| 213 |
POM |
POM Celcon LW90-F2 |
Celcon LW90-F2 is an acetal copolymer formulated with a nominal 9 melt flow rate base polymer and a standard level of polytetrafluoroethylene filler (PTFE). It is designed for use in wear applications against plastic, metal, glass, or ceramic mating surfaces where silicone lubricants cannot be tolerated. |
|
Celanese |
1.4 |
|
| 214 |
POM |
POM Delrin 500AL NC010 |
|
|
Dupont |
1.39 |
|
| 215 |
POM |
POM Delrin? 900P NC010 |
Low Viscosity Acetal Homopolymer with Improved Processing. |
|
DuPont |
1.42 |
|
| 216 |
POM |
POM Delrin 527UV |
|
|
Dupoint |
1.41 |
|
| 217 |
POM |
POM Delrin 511P |
|
|
Dupont |
1.42 |
|
| 218 |
POM |
POM DuPont Delrin 100P NC010,Natural |
High Viscosity Acetal Homopolymer, It has improved processing thermal stability, mechanical properties is good, low volatile emissions |
Electronic appliances: washing machine, juice machine, timer and other components; Car handlebar, electric Windows and other parts; Machine parts, gear, handle, screw, toys, etc |
Dupont |
1.42 |
|
| 219 |
POM |
POM DuPont Delrin 500P NC010,Natural |
Medium Viscosity Acetal Homopolymer for Injection molding. It has improved processing thermal stability, mechanical properties is good, low volatile emissions |
Electric heating cup, bakelite gear, bearing, motor leaves, motor samples, motor, relay, motor vibrator, electric cabinet terminal blocks, elevator kit, elevator parts manufacturing, electrical cable tie and etc |
Dupont |
1.42 |
|
| 220 |
POM |
POM ESD 800 HB |
|
|
RTP |
1.38 |
|
| 221 |
POM |
POM Hostaform C9021 |
High rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. |
automtive engineering,precision engineering,electric and electronical industry,domestic appliance. |
Celanese |
1.41 |
|
| 222 |
POM |
POM Hostaform C 13031XF |
|
|
Ticona |
1.42 |
|
| 223 |
POM |
PPOM KEPITAL F20-52 (ACETAL) |
Medium viscosity,High mechanical strength,Good fatigue resistanceCreep resistance,UV resistance |
Gears,Automobiles,Industrial applications,E&E parts |
KINGFA |
1.41 |
|
| 224 |
POM |
POM Kepital ET-20A |
carbon black filled conductive grade with 10^4 ohms of surface resistivity. ET-20A has excellent stability in various fuels, so it suited for fuel applications |
|
KEP |
1.39 |
|
| 225 |
POM |
POM Kepital F20-03,Natural |
Low density,Low temperature resistance, most alkali erosion, water imbibition is small |
Application on cars, electrical accessories, electronic data processing, industrial parts, machinery/machinery parts |
Kepital |
1.39 |
|
| 226 |
POM |
POM Kepital FG2015 |
A medium viscosity grade for general injection molding. It was reinforced glass fiber, and so suitable for parts requiring very high stiffness, fatigue resistance, creep resistance, and heat resistance. |
|
Kepital |
1.50 |
|
| 227 |
POM |
POM Ticona Celcon M90,Natural |
General purpose, good optimization of properties |
Used in general machinery parts, gear, CAM, appliances, audio products |
Ticona |
1.41 |
|
| 228 |
POM |
POM Ticona Celcon M90UV |
|
|
Ticona |
1.41 |
|
| 229 |
POM |
POM Ticona-Celcon M90-34,Natural |
Standard unfilled appliance grade – improved stain resistance |
Electronic appliances: washing machine, juice machine timer component, such as car: car, electric Windows and other parts; Machine parts, gear, handle, screw, toys, etc |
Ticona |
1.41 |
|
| 230 |
POM |
POM Uitraform N 2320 003 |
Rapily solidifying standard grade for injection molding |
|
BASF |
1.40 |
|
| 231 |
POM |
POM Iupital F20-03 |
|
|
Mistubishi |
1.41 |
|
| 232 |
POM |
POM+PTFE Delrin 500AF |
Wear and Low Friction |
|
DuPont |
1.53 |
|
| 233 |
PP |
PP Globalene 7633,Natural |
Low transparency, low gloss, low rigidity, but there are have stronger impact strength |
Automobile motorcycle parts, bumper, battery boxes, tool box, office furniture, sports equipment,Consumer goods: POTS, buckets, furniture, film, woven bag, bottle caps, lawn and garden equipment |
NAN YA |
0.90 |
|
| 234 |
PP |
PP K1011,Natural |
FDA Compliance,Transparent, abrasion resistance, chemical resistance, resistance to high temperature |
Household items, toys products |
Taiwan Petrochemicals |
0.90 |
|
| 235 |
PP |
PP NAN-YA 3317,Natural |
Flame retardant grade, UL94V – 0, conforms to UL746C safety test, water resistance, weather resistance |
Decorations for Christmas lights, automobile and home appliance products flame retardant requirements |
NAN YA |
0.97 |
|
| 236 |
PP |
PP POLYPRO HJ4012 |
Flame Rated; RoHS Compliant;Good Processability; Heat Resistant; High Stiffness. |
Appliances; Automotive; Food Contact Applications; Household Applications; Housings. |
YUHWA |
0.91 |
|
| 237 |
PP |
PP Total HJ730L |
High crystallinity,FDA |
use in electronic appliances and high strength automobile parts |
Samsung |
0.91 |
|
| 238 |
PP |
PP YUNGSOX 5090T |
High transparency,good resistance to chemical |
high transparency container and housewares,disposable syringes |
YUNGSOX |
0.92 |
|
| 239 |
PP |
PP YUNGSOX PP5090T |
Flame Rated Chemical Resistant Clarity Copolymer |
Medical/Healthcare ? Containers ? Food Contact Applications ? Household Applications |
Formosa |
0.9 |
|
| 240 |
PP+10%GF |
PP+10%GF Total PP GH41 |
|
|
Samsung |
0.97 |
|
| 241 |
PP-20%Tac |
PP+20%Tac Globalene PF4206 |
Good processability,High stiffness |
Applicances,Furniture,Household Applications. |
Globalene |
1.04 |
|
| 242 |
PP+40%GF |
PP+40%GF KINGFA NC001 |
Chemically coupled , High strength & stiffness, Good heat resistance, Good dimensional stability , Good surface appearance |
Chemically coupled , High strength & stiffness , Good heat resistance Good dimensional stability , Good surface appearance |
KINGFA |
1.24 |
|
| 243 |
PP+MF20% |
PP+MF20% LUPOL GP3200 |
General Purpose |
Electrical & Electronic,Automotives Parts |
LG |
1.06 |
|
| 244 |
PP |
PP-ExxonMobil PP7033E3 |
|
An impact copolymer resin designed for consumer and industrial products requiring high impact resistance. |
ExxonMobil |
0.9 |
|
| 245 |
PP |
PP-Hostacom M4 N01 L303612 |
Hostacom M4 N01 L303612 is a mineral filled PP homopolymer, with low melt flow rate. Product is UL listed.” This grade is not intended for medical, pharmaceutical, food and drinking water applications. |
|
LyondellBasell |
1.21 |
|
| 246 |
PP+20%GF |
PP-PP+20%GF GFPP-20 N-101 |
High strength & stiffness |
Power tools HouseholdStructural frames appliances? parts |
KINGFA |
1.04 |
|
| 247 |
PPA |
PPA Amodel HFFR-4133 |
This resin is rated-V-0 by underwriters laboratories using the UL94 test and is hot-water moldable. it has high flow and a wide processing window and offers good surface appearance. especially for larger electrical components. |
It is well suited for connectors and other electrical devices requiring surface mount technology. |
Solvay |
1.46 |
|
| 248 |
PPA |
PPA Grivory GTR 45 |
Grivory GTR 45 is a Polyamide 6I/6T Copolymer (Nylon 6I/6T) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding or injection stretch blow molding. |
Medical/Healthcare Automotive Food Contact Applications Packaging Appliances |
EMS |
1.18 |
|
| 249 |
PPA |
PPA Zytel HTN?54G35HSLR BK031 |
35% Glass Reinforced, Toughened, PPA, High Performance Polyamide |
|
Dupont |
1.42 |
|
| 250 |
PPA+GF35% |
PPA+GF35% Zytel HTN54G35HSLR NC010 |
Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature, to high moisture, and to harsh chemical environments. Polymer families and grades of Zytel HTN are tailored to optimize performance as well as processability. |
Typical applications with Zytel HTN include demanding applications in the automotive, electrical and electronics, domestic appliances, and construction industries. |
DuPont |
1.42 |
|
| 251 |
PPC |
PPC Polykemi 26000 |
|
|
Polykemi |
0.92 |
|
| 252 |
PPE+PS 10%GF |
PPE+PS 10%GF NORYL Resin SE1GFN1 |
PPE+PS blend. 10% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications. |
|
Sabic |
1.16 |
|
| 253 |
PPE+PS30%GF |
PPE+PS30%GF NORYL SE1GFN3 |
|
|
SABIC |
1.31 |
|
| 254 |
PPO |
PPO Noryl HM3020H |
High flow |
Application in the automobile industry, textile and machinery manufacturing, chemical industry, electronic industry, etc |
Sabic |
1.33 |
|
| 255 |
PPO |
PPO Noryl PX9406P |
Nonbrominated,nonchlorinated,flame retarded. |
Electrical applications |
Sabic |
1.09 |
|
| 256 |
PPO-10%GF |
PPO+10%GF Noryl GFN1-701 |
FDA compliance,Low water absorption,hydrolytic stability,dimensional stability |
Suitable for fluid engineering applications including pump housings,pump impellers and water meter components |
Sabic |
1.13 |
|
| 257 |
PPO-30%GF |
PPO+30%GF Noryl GFN3-701 |
FDA compliance,Low water absorption,hydrolytic stability,dimensional stability. |
Suitable for fluid engineering applications including pump housings,pump impellers and water meter components. |
Sabic |
1.29 |
|
| 258 |
PPS |
PPS RYTON R-7-120BL |
Provide good strength and low maintenance molding using conventional molding equipment. |
|
Solvay |
1.99 |
|
| 259 |
PPT-15%GF |
PPT-15%GF VALOX 855 |
|
|
SABIC |
1.54 |
|
| 260 |
PS |
PS Styrolution PS?1300/1301 |
|
Medical labware,Appliance accessory parts,Profile extrusion,Cosmetic cases |
INEOS |
1.04 |
|
| 261 |
PPS |
PPS ESD A 1305 |
|
|
RTP |
1.64 |
|
| 262 |
PPS |
PPS RTP 1399 X 124285 BLACK |
|
|
RTP |
1.76 |
|
| 263 |
PPS 40% GF |
PPS+40%GF Ryton R-4-200BL |
|
|
Solvay |
1.68 |
|
| 264 |
PPSU |
PPSU Radel R-5000 CL 301 |
Radel R-5000 is a transparent polyphenylsulfone (PPSU) which offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offer high deflection temperatures and outstanding resistance to environmental stress cracking. Radel? polymers are inherently flame |
|
SOLVAY |
1.29 |
|
| 265 |
PPSU |
PPSU D-3000 |
DURADEX D-3000 resin offers exceptional hydrolytic stability, and its toughness is superior to many commercially available, high-temperature engineering resins. It features high deflection temperature and outstanding resistance to environmental stress cracking. The polymer is inherently flame retardant, and also has excellent thermal stability and good electrical properties. |
|
DURADEX |
1.29 |
|
| 266 |
PSU |
PSU Ultrason S3010 |
Good Chemical/Crack Resistance, good toughness, |
Typical applications include laboratory accessories and household parts. |
Basf |
1.23 |
|
| 267 |
PTFE |
PTFE Teflon 7A X |
Food Contact acceptable,high Elongation,good chemical resistance,low Friction,good stiffness,Low Smoke Emission |
|
Dupont |
2.16 |
|
| 268 |
GE70S |
PROFLEX GE70S |
|
|
YouKe |
0.87 |
|
| 269 |
PVC |
PVC 1V1202 |
water pipe/Industrial parts |
|
Made in China |
1.35 |
|
| 270 |
PVC |
PVC Geon Vinyl Fittings M1000 |
Fittings |
|
Polyone |
1.4 |
|
| 271 |
PVC+ABS |
PVC+ABS KINGFA VSLOY-PM KV1727WT |
|
Injection molding, Electric appliance, Power switch, Lamp accouterment, Pipefitting |
KINGFA |
1.33 |
|
| 272 |
PVC 65D soft |
PVC 65D soft PolyOne C6500 |
|
|
Polyone |
1.34 |
|
| 273 |
PVC |
PVC MP251(Only for GE) |
high flow,high impact/. it is just only supply to GE project. |
Appliances |
PolyOne |
1.33 |
|
| 274 |
PVC |
PVC PolyOne VC10007570NC |
|
|
PolyOne |
1.4 |
|
| 275 |
Silicon Rubber |
Silicon Rubber, 45-A |
|
|
Local |
1.2 |
|
| 276 |
Silicon Rubber |
Silicon Rubber, 55-A |
|
|
Local |
1.2 |
|
| 277 |
Silicon Rubber, 60-A |
Silicon Rubber, 60-A |
|
|
local |
1.2 |
|
| 278 |
Silicon Rubber |
Silicon Rubber, 75-A |
|
|
Local |
1.2 |
|
| 279 |
Silicone Rubber |
Silicone Rubber 30-A > Wacker Elastosil R 401-30 |
|
|
|
2.3 |
|
| 280 |
SAN |
SAN-Luran 368R |
Luran 368R is a general purpose grade of SAN with well-balanced properties, suitable for injection molding and extrusion. It features very good transparency, good heat resistance and very good dimensional stability. |
|
BASF |
1.08 |
|
| 281 |
TEO |
TEO ESD C 2800 B-55A, PMS BLACK |
|
|
RTP |
1.02 |
|
| 282 |
TEO |
TEO ESD C 2800 B-65A, PMS BLACK |
|
|
RTP |
1.02 |
|
| 283 |
TEO |
TEO PERMASTAT 2800-70A, PMS BLACK |
|
|
RTP |
0.99 |
|
| 284 |
TEO |
TEO RTP 2800 B-75A HF |
|
|
RTP |
1.02 |
|
| 285 |
TPE |
TPE Chimei PB-575 |
|
|
Chimei |
1.2 |
|
| 286 |
TPE |
TPE GLS Versaflex OM 9-802CL |
|
|
PolyOne |
0.93 |
|
| 287 |
TPE |
TPE Local 75 shore A |
|
|
Local |
1.2 |
|
| 288 |
TPE |
TPE Local 90 shore A |
|
|
Local |
1.2 |
|
| 289 |
TPE |
TPE PolyOne GLS Versaflex 6240 |
Adhesion to a range of engineering plastics Clear, heat instant TPEs Excellent colorability Ultra-clear grades Ultra-soft TPEs down to 30 Shore FDA, USP VI, ISO 10933 approved grades NSF, and UL 94 listed grades Extrusion, injection, and blow moldable Sterilizable under autoclave, radiation and EtO gas |
healthcare, consumer, electrical and electronics, packaging and appliance markets |
PolyOne |
1.1 |
|
| 290 |
TPE |
TPE Santoprene 8191-55B100 |
excellent adhesion onto ABS,PS,PC,PMMA and ASA |
Consumer Applications,Seal and gaskets, solve Touch Grips |
Santoprene |
1.04 |
|
| 291 |
TPE |
TPE Santoprene TPV 101-87 |
A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding, extrusion or blow molding. It is polyolefin based and completely recyclable. |
|
Santoprene |
0.96 |
|
| 292 |
TPE |
TPE Santoprene 8211-65 |
A soft, colorable, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in difficult injection molding applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding or blow molding. It is polyolefin based and recyclable within the manufacturing stream |
|
Santoprene |
0.93 |
|
| 293 |
TPEE |
TPEE Hytrel 3078 |
30 Shore D High performance; polyester elastomer with non-discoloring stabilizer. |
|
DuPont |
1.07 |
|
| 294 |
TPEE |
TPEE Hytrel 5526 |
55 Shore D High performance; high flow polyester elastomer developed for injection molding. |
|
DuPont |
1.19 |
|
| 295 |
TPEE |
TPEE KEYFLEX BT 1055D |
|
|
LG |
1.2 |
|
| 296 |
TPU 85A |
TPU 85A – Desmopan 385 S |
|
|
Bayer |
1.2 |
|
| 297 |
TPU |
TPU Desmopan DP9370AU |
UV stabilizer, very good hydrolysis and microbial resistance, good low temperature flexibility, free from plasticizers, high moisture vapor transmission rate. |
breathable films,Sports shoe soles,hard-soft systems. |
Bayer |
1.08 |
|
| 298 |
TPU |
TPU Elastollan 1170 A |
Thermoplastic Polyether Polyurethane Elastomers with outstanding hydrolysis resistance, low temperature flexibility and resistance to micro-organisms. Typical applications Cable jackets, plugs and terminations, spiral tubing, Films, ski-boot shells, ear tags, technical mouldings like mining screens, railway pads, seals. |
|
BASF |
1.08 |
|
| 299 |
TPU |
TTPU DP 2790A |
|
|
|
1.21 |
|
| 300 |
TPU |
TPU 85A +/- 5 durometer TPU |
|
|
Made in China |
1.2 |
|
| 301 |
TPU |
TPU ENPLAS Q8485EW |
|
|
ENPLAS |
1.1 |
|
| 302 |
TPU |
TPU Isoplast 302EZ |
|
|
Lubrizol |
1.20 |
|
| 303 |
TPU |
TPU Texin 250 |
|
|
Bayer |
1.22 |
|
| 304 |
TPV |
TPV Santoprene 101-55 |
A soft, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It is polyolefin based and recyclable within the manufacturing stream. |
|
Santoprene |
0.97 |
|
| 305 |
TPV |
TPV UL94-V0 ExxonMobil Santoprene 251-80W232 |
|
|
ExxonMobil |
1.24 |
|
| 306 |
TPV |
TPV Santoprene 101-73 |
A soft, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding, extrusion or blow molding. It is polyolefin based and completely recyclable. |
|
Santoprene |
0.97 |
|
| 307 |
TPV |
TPV Santoprene 123-50 |
EU Directive 2002/95/EC cpmpliant |
Can be processed on conventional thermoplastics equipment. |
Santoprene |
1.05 |
|
| 308 |
TPV |
TPV Santoprene 8211-35 |
|
|
Santoprene |
0.93 |
|
| 309 |
TPV |
TPV Santoprene 8211-55B100 |
excellent adhesion onto ABS,PS,PC,PMMA and ASA |
Consumer Applications,Seal and gaskets, solf Touch Grips |
Santoprene |
1.04 |
|
| 310 |
TPV |
TPV-Santoprene 201-87 |
|
|
?ExxonMobil |
0.96 |
|
| 311 |
TPX |
TPX-MX004 |
|
|
MITSUI |
0.833 |
|
