Call Us Today! China +86-769-3363 0009 |info@upmold.com

Plastic Material

/Tag: Plastic Material

Plastic material properties | plastic material selection guide

 

Plastic Datasheet table

Plastic Injection Material Property Datasheet ID Material Name Material Grade Charateristics Application Brand & Suppliers Density(g/cm3) Spec 1 ABS ABS BASF Terluran GP-22 Terluran GP-22 is and easy-folw, general purpose injection molding grade with high resistance to impact and heat distortion intended for wide range of applications, particularly in [...]

By |2018-10-16T13:10:31+00:00October 16th, 2017|Categories: Injection Molding Technical, Material Characteristics|Tags: |

Plastic Material Application Chart

Plastic Material Application Chart There are many types of materials that may be used in the injection molding process. Most polymers may be used, including all thermoplastics, some thermosets, and some elastomers. When these materials are used in the injection molding process, their raw form is usually small pellets or a fine powder. [...]

By |2018-09-30T15:47:36+00:00October 16th, 2017|Categories: Injection Molding Technical, Material Characteristics|Tags: |

Plastic Material Short Name List

Plastic Material Short Name List XPS                Polystyrene Crystal HIPS               High Impact Polystyrene  SAN                Styrene Acrylonitrile Copolymer  ABS                Acrylonitrile Butadiene Styrene  PMMA             Polymethylmethacrylate (Acrylic)  MBS               Polymethacrylate Butadiene Styrene  RPVC              Rigid Polyvinyl Chloride  CPVC              Chlorinated Polyvinyl Chloride  PVDC              Polyvinylidene Chloride  PB                  Polybutylene  LDPE              Low Density Polyethylene  LLDPE             Low Linear Density Polyethylene  HDPE              High [...]

Plastic Shrinkage Rate Chart

Plastic Shrinkage Rate Chart Plastic Shrinkage rate is a volume contraction rate of polymers from the melt state and the cooled condition that will determine the molding parts dimension and accuracy, it is expressed in percent. Semi-crystalline polymers (e.g: PBT or PP) always show a higher shrinkage than amorphous [...]

Plastic Material Properties

Thermoplastic Resin Material Property Data-Sheet Download Material Features Tensile Strength (psi) Flexural Modulas (psi) Impact Strength (notched izod ft-lb/in) Max Temperature (deflection or softening) ABS (Acrylonitrile Butadiene Styrene) Good impact resistance Good processability and appearance Dimensional stability 5,000-12,000 70,000-380,000 3.0-7.5 140°-200° F Material Brand Data Sheet Polylac PA-746 Chimei [...]

By |2018-10-17T02:19:45+00:00July 16th, 2017|Categories: Injection Molding Technical, Material Characteristics|Tags: |

Plastic material shrinkage and density

Plastic material shrinkage and density | Plastic Chinese-English Plastic material shrinkage and density; Common Plastic material Resin Name Chinese-English Bilingual List including plastic Chinese name, English short name, plastic density and shrinkage rates. 常用塑料中英文名对照表 Common Plastic Resin Name Chinese-English Bilingual List 朔胶类别 categories 简称 Short Name 中文学名 Chinese Name [...]