Call Us Today! China +86-769-3363 0009
|info@upmold.com

Glossary & Correlating

Home/Glossary & Correlating

Injection mold glossary, injection molding technology

technical terminology in both English and Chinese

Milling & Turning Metal Properties

Precision Machining Manufacturing Process Technology Milling Material / Grade Features Color Max Depth Data Sheet Aluminum / 6061-T651 Improved corrosion resistance over 7075 General purpose aluminum Medium strength Gray 3.75 in. (95.25mm) Aluminum / 7075-T651 Higher strength over 6061 Good fatigue strength Gray 3.75 in. (95.25mm) Brass / 260 (70/30) Good [...]

Die Casting Glossary in both Chinese and English

Die Casting Die Glossary in both Chinese and English The draft angle is the amount of taper for molded or cast parts perpendicular to the parting line. It can be measured in degrees or mm/mm (in/in). What is the Die Casting? Die casting is a metal casting process that is characterized by forcing molten metal under [...]

By |2018-09-21T18:26:55+00:00April 21st, 2018|Categories: Glossary & Correlating|

Tap size Drilling chart

Tap size Drilling chart The tap size chart provides a list of standard size taps, specifying the diameter and thread spacing, for fractional, metric, and screw sizes. The decimal equivalents of the diameters are shown in both English and Metric units. Fractional sizes are listed in inches, while metric sizes are listed in [...]

By |2018-09-29T17:55:17+00:00February 22nd, 2018|Categories: Glossary & Correlating, Injection Mold Manufacturing|

Powder Coating Technology

Powder coating Powder coating – a painting process in which colored dry powder paint is used. The dry powder is provided a negative electrostatic charge (from 10,000 to 90,000 volts). Sometimes referred to as powder painting and dry painting. After the object is covered with paint – it goes into the oven where the paint [...]

By |2018-09-29T17:50:40+00:00August 22nd, 2017|Categories: Glossary & Correlating, Surface finish standards|

Drilling hole size chart

Drill Size Chart For Tooling Machining Manufacturing The drill size chart provides a list of standard size drill bits in several measurement systems, including fractional, metric, wire gauge number, and letter. The decimal equivalents of the diameters are shown in both English and Metric units. Fractional sizes are measured in inches, while metric [...]

By |2018-09-30T16:04:52+00:00July 22nd, 2017|Categories: Glossary & Correlating, Injection Mold Manufacturing|Tags: |

Metal Properties & Applications

Metals Almost 75% of all elements are metals. Metals are used in electronics for wires and in cookware for pots and pans because they conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than the other elemental substances. Two or more metals can be alloyed to create [...]

By |2018-09-30T15:41:28+00:00June 22nd, 2017|Categories: CNC Machining, Glossary & Correlating, Material Characteristics|Tags: |