Call Us Today! China +86-769-3363 0009 |info@upmold.com

Plastic injection molding

/Plastic injection molding

Plastic Injection Molding mold design & manufacturing

Plastic injection molding custom manufacturer Chinese UPMOLD offers plastic injection molding mold design, manufacturing and injection molding plastic parts in hours.

Plastic Injection Design Guidance

Plastic Injection Design Guidance Plastic Injection Design Guidance that is guiding the injection mold designer and injection molding mold manufacturer to do the design and manufacturing; You will know Some key points of the plastic injection mold design or manufacturing. How to do the plastic injection molded part design and injection mold [...]

Plastic Injection Molding Processing Conditions

Plastic Injection Molding Processing Conditions ABS processing conditions Generic Class ABS (Acrylonitrile-Butadiene-Styrene) Typical Applications Automotive (instrument and interior trim panels, glove compartment doors, wheel covers, mirror housings, etc.), refrigerators, small appliance housings and power tools applications (hair dryers, blenders, food processors, lawnmowers, etc.), telephone housings, typewriter housings, typewriter [...]

Injection moulding problems and solutions

Plastic injection moulding problems and solutions chart Plastic molding defects definition, reasons and solutions. Molding Defects Alternative Name Descriptions Causes Blister Blistering Raised or layered zone on surface of the Plastic part Tool or material is too hot, often caused by a lack of cooling around [...]

Plastic injection molding tolerance standards

Plastic injection molding tolerance standards Establishing tolerance with respect to product has significance importance on moldability and cost. It is recommended to indicate only critical dimensions with tolerances on a drawing. Depending on application, a division into three tolerance class can be made: Normal, Medium & Fine Cost of manufacture for Medium [...]

Injection Molding Defects And Solutions

Plastic Injection Molding Defects And Solutions Molding Flash of Injection Molding defect Solving molding flash problems Definition molding flash occurs when a thin layer of material is forced out of the mold cavity at the parting line or ejector pins location. This excess material remains attached to the molded [...]